Table of Contents
Advertisement
Energy-saving tips
en
7
Energy-saving tips
Spin the laundry before drying. The
■
E n e r g y - s a v i n g t i p s
drier the laundry, the shorter the
programme will be, in turn reducing
energy consumption.
Load the appliance with the
■
maximum loads permitted for the
programmes.
If the maximum load is
Note:
exceeded, this extends the programme
duration and increases energy
consumption.
Operate the appliance in a ventilated
■
room and make sure that the air inlet
on the appliance is unobstructed so
that air exchange can take place
unhindered.
Regularly remove the fluff from the
■
appliance. If there is fluff in the
appliance, this extends the
programme duration and increases
energy consumption.
If you do not perform any actions on
■
the appliance for an extended period
before the programme starts or once
the programme has ended, the
appliance will automatically switch to
Energy saving mode. The display
and indicator lights will go out after a
few minutes and (Start/Pause) A
will flash.To end Energy saving
mode, all you need to do is perform
an action on the appliance, such as
opening and closing the door.
If you do not perform any actions on
■
the appliance for an extended period
when it is in Energy saving mode,
the appliance will automatically
switch itself off.
12
5
Installing and
connecting the
appliance
Included with the appliance:
I n s t a l l i n g a n d c o n n e c t i n g t h e a p p l i a n c e
Accompanying documents (e.g.
installation and operating
instructions)
Remove any packaging and
1.
protective covers completely from
the appliance.
Open the door.
2.
Remove all the accessories from the
3.
drum.
You can now install and connect the
appliance.
Caution!
Risk of material damage/damage to the
appliance
Objects remaining in the drum that are
not designed for operation with the
appliance may result in material
damage and damage to the appliance.
Remove these objects, along with all
accessories, from the drum.
Advertisement
Table of Contents
