Samsung DVG45R6300 Series User Manual page 41

Hide thumbs Also See for DVG45R6300 Series:
Table of Contents

Advertisement

Available languages

Available languages

05 Time
06 Wrinkle Prevent
07 Eco Dry
08 Damp Alert
09 Drum Light
(DVE(G)45R6300*
models only)
10 Adjust Time
11 Smart Control
(DVE45R6300*
models only) /
Smart Monitor
(DVG45R6300*
models only)
12 Power
Untitled-16 41
Press Time to select a drying time for the selected cycle. This
is available only with TIME DRY, QUICK DRY, and AIR FLUFF.
This button is not available for Sensor Dry cycles because exact
drying times are determined by fluctuating humidity levels.
Wrinkle Prevent provides approximately 180 minutes of
intermittent tumbling in unheated air at the end of the cycle to
reduce wrinkling. Press Wrinkle Prevent to activate this feature.
The load is dry and can be removed at any time during the
Wrinkle Prevent cycle.
This function is available with NORMAL and TIME DRY. With
the Eco Dry activated, drying takes a longer time but power
consumption is reduced.
The drying time can be extended by up to 3 times normal
depending on the temperature and load. The Eco Dry function is
enabled by default.
This alert is available for all Sensor Dry cycles except for
ACTIVEWEAR. Available dry levels are Normal, More, and Extra.
If a load contains mixed fabrics, the Damp Alert indicator blinks
when average dryness of the items in the load is 80 % dry. This
lets you take items that you don't want fully dried or that dry
quickly out of the dryer early while letting others continue to
dry.
Press to turn the interior lamp on or off. The lamp stays lit for 2
minutes after it has turned on, regardless of whether the power
is on or off or the door is open or closed, and then turns off
automatically.
You can change the set time for the selected cycle. This is
available only with TIME DRY, QUICK DRY, and AIR FLUFF. To
change the cycle time, press Adjust Time
until the desired time is displayed.
After connecting the Tumble Dryer to your home network using
the SmartThings app, you can control or monitor the dryer
remotely. When started, the Smart Control (Smart Monitor)
indicator blinks. The dryer enters waiting mode and waits for
remote commands.
Press to turn on/turn off the dryer.
or Adjust Time
English 41
2019-01-24
2:31:23

Advertisement

Chapters

Table of Contents
loading

Table of Contents