Acer H6540BD User Manual page 48

38
Lock User Startup Screen
Default Lock User Startup Screen is "Off". If lock user startup screen
is "On", users cannot change startup screen anymore and avoid
other users change that arbitrarily. Choose "Off" to unlock startup
screen.
Network LAN IP/Mask
Identify IP and Mask address.
WiFi IP/Mask
Identify IP and Mask address.
MAC Address
Identify MAC address.
Wake on LAN (Standby)
Set to "On" to enable wake-on-LAN function to power on
projector via LAN under standby status. It is required to download
WOL (wake-on-LAN; WOL) tool or app for PC/Mobile by users for
this function.
DHCP
• On: Projector will obtain an IP address automatically from your
network.
• Off: Assign an IP address manually.
<Note>
1. Only available when DHCP set to Off, and will gray out if DHCP
set to On.
2. Press "Enter" to let users key in values and press "Enter" again to
save values temporarily.
3. Press "Apply" to confirm to save the settings for all in LAN
setting page.
<Note> Grey out when LAN isn't plugged in and LAN IP X.X.X.X
show 0.0.0.0
LAN Reset
Reset LAN function.
Reset Press the "ENTER" button and choose "Yes" to return the
parameters on all menus to the factory default settings.
Note: Functions vary depending on model definition.