Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Genesis GLID20A
Summary of Contents for Genesis GLID20A
- Page 1 GLID20A Lithium-Ion Impact Driver Tournevis à percussion à pile lithium-ion 12V Destornillador de impacto de litio-ion de 12V Operator’s Manual Manuel d’utilisation Manual del Operario TOLL FREE 888-552-8665 HELP LINE: www.genesispowertools.com WEBSITE:...
-
Page 2: Specifications
SPECIFICATIONS • Model: ------------------------ GLID20A • Rated Power: ----------------- 20V DC • No-Load Speed: -------------- 0-2200 RPM, Reversible • Impacts Per Minute: ---------- 0-3800 • Maximum Torque: ------------ 1062 In-lbs • Chuck Size: ------------------- 1/4" Hex • Battery: ----------------------- 20V, Lithium-ion, 1.5Ah • Charger Input: ---------------- 120V~, 60 Hz • Charging Time: --------------- 3-5 Hours • Net Weight: ------------------- 2.5 Lbs Includes: Battery Pack, Charger, and #2 Phillips bit WArNING: o reduce the risk of injury, user must read and understand this operator’s manual before operating this tool. -
Page 3: Work Area Safety
WORK AREA SAFETY Keep your work area clean and well lit. • Cluttered benches and dark areas invite accidents. Do not operate power tools in explosive atmospheres, • such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. Keep bystanders, children, and visitors away while operating a power tool. • Distractions can cause you to lose control. ELECTRICAL SAFETY Power tool plugs must match the outlet •... - Page 4 Always use properly fitting NIOSH/OSHA approved respiratory protection appropriate for dust exposure, and wash exposed areas with soap and water. 20V Lithium-Ion Impact Driver Operator’s Manual GLID20A...
-
Page 5: Extension Cords
SERVICE • Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Service your power tool periodically • . When cleaning a tool, be careful not to disassemble any portion of the tool since internal wires may be misplaced or pinched. SAVE THESE INSTRUCTIONS EXTENSION COrDS Grounded tools require a three wire extension cord Double insulated tools can use either a two or three wire extension cord. As the distance from the power supply outlet increases, you must use a heavier gauge extension cord. using extension cords with inadequately sized wire causes a serious drop... - Page 6 . This will risk of explosion and possibly personal injury. Never use a battery which has been dropped or received a sharp blow. • damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately. Use designated battery pack (Genesis™ -Model GLAB20A) and charger • (Genesis™- Model GLACH20AS) for this tool. use of any other batteries may result in a risk of fire. WArNING: read and understand safety and operating instructions of designated battery and charger before using this tool.
- Page 7 Battery leakage may occur • under extreme usage or temperature conditions. Avoid contact with skin and eyes. If liquid comes in contact with your skin, wash immediately with soap and water. If liquid gets into your eyes, wash them out with clear water for at least 10 minutes, and then seek medical attention right away. Do not attempt to use a step-up transformer, • an engine generator or DC power receptacle. Do not short the battery pack. • Do not touch the terminal with any conductive material. Avoid storing battery pack in a container with other metal objects such as nails, coins, etc. Always protect the battery terminals when battery pack is not used. Do not charge battery pack inside a box or container of any kind •...
-
Page 8: Contents In Package
• Batteries may become warm while charging. This is normal. • If battery is hot after continuous use in the tool, allow it to cool down to room temperature before charging. This will extend the life of your batteries. NOTE: It takes approximately 3-5 hours to charge up a completely discharged battery. WArNING: Always disconnect the battery pack from the tool or place the switch in the locked or off position before any assembly, adjustments or changing accessories. 20V Lithium-Ion Impact Driver Operator’s Manual GLID20A... -
Page 9: Electric Brake
TRIGGER SWITCH ACTION • Turn the driver on by depressing the trigger switch (2-fIG 1). • Depressing the switch further will produce more speed and torque. • use the reversing switch (3-fIG 1) to change the direction of rotation of the driver. • The reversing switch has three positions: forward, Reverse, and Off (middle). • Always check the rotation before beginning your work. LED WORK LIGHT Your tool has a built-in LeD work light to illuminate the work area. When you turn on the tool, the work light will automatically turn on. BATTERY POWER INDICATOR Your tool has a built-in battery power indictor (5-fIG 1) right above the trigger switch. It has three colored lights- Green, Yellow and Red. Depress the trigger switch slightly to check the battery power level. When all three lights illuminate, it indicates the battery is at full power. The battery is at half full power when only the yellow and red lights illuminate. When the red light illuminates only, it indicates that the battery is at low power level and requires immediate charging. ELECTRIC BRAKE This driver is equipped with an electric brake. The electric brake provides you with another element of control during various operations. If the tool consistently fails to quickly stop after trigger switch release, have a qualified serviceman examine the tool. 1/4" HEX CHUCK (FIG 4) • Your driver is equipped with a tool-less 1/4" Hex Chuck, so you can quickly change bits with no extra tools required. • Remove battery pack or place the forward/Reverse Switch in the center (Off) position. -
Page 10: Maintenance
THIS PRODUCT IS NOT WARRANTED IF USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES. ACCESSORIES INCLUDED IN THIS KIT ARE NOT COVERED BY THE 2 YEAR WARRANTY. TOLL-FrEE HELP LINE 888-552-8665 for questions about this or any other GeNeSIS™ Product, please call Toll-free: www.genesispowertools.com Or visit our web site: ©richpower Industries, Inc. All rights reserved Richpower Industries, Inc. 736 Hampton Road Williamston, SC 29697 Printed in China, on recycled paper 20V Lithium-Ion Impact Driver Operator’s Manual GLID20A... - Page 11 Richpower Industries, Inc. 736 Hampton Road Williamston, SC USA www.genesispowertools.com 2015.08. V01...