Hamlet HNW600ACU User Manual page 12

The following table describes the parameters that can be configured in the "Wireless Network
Properties" window.
Profile name
Network Name
(SSID)
This is a computer-
to-computer (ad
hoc) network
Channel
Network
Authentication
Data encryption
ASCII /
PASSPHRASE
Key index
Network key /
Confirm network key
EAP TYPE / Tunnel /
Provision Mode
Username / Identity /
Domain / Password
Certificate
PAC
You can give a name to this profile, so you can remember its
purpose easily. It can be any phrase to help you remember.
The SSID (Service Set IDentifier, i.e. access point's name).
This must be identical with the SSID of the access point you
wish to connect.
Check this box if you wish to connect to another computer /
network device by ad hoc method. When not accessing to
wireless access point, you have to check this box.
Select wireless channel for ad hoc connection. This option
only appears when you're using ad hoc connection.
Select the network authentication type from drop-down menu.
This setting must be identical with the setting of wireless
access point you with to connect.
Select the data encryption type from drop-down menu. This
setting must be identical with the setting of wireless access
point you with to connect.
When the encryption type is "WEP", it's required to input a set
of "passphrase" to connect to wireless access point. Check
"ASCII" or "PASSPHRASE" depends on the security setting of
access point, and input it in the box; if you select
"PASSPHRASE" you also need to select the length of the key.
The passphrase must be identical with the setting of wireless
access point you with to connect.
Select WEP key index. For most of access points you can
select "1", but please refer to the setting of the access point.
When the encryption type is "WPA" or "WPA2-PSK", it's
required to input a set of "passphrase" to connect to wireless
access point. Please input the same passphrase in two boxes
for confirmation.
When authentication type is any of 802.1X, you have to select
EAP type, tunnel, and provision mode from dropdown menu.
This setting must be identical with your 802.1x authentication
server.
Please input 802.1x related authentication information here.
If certification is required to authenticate with 802.1x
authentication server, please select a local certificate from
dropdown list.
Check this box and PAC (Privilege Access Certificate) will be
automatically selected.
12