Summary of Contents for Transrotor KONSTANT
- Page 1 Transrotor KONSTANT Operating Manual RÄKE HIFI/VERTRIEB GMBH, IRLENFELDER WEG 43, D-51467 BERG. GLADBACH Telefon 02202/31046 Telefax 02202/36844...
- Page 2 Setting up your belt position 1. The motor pulley has two positions, large diameter and small diameter. 1. Place the belt on the smaller diameter (top) of the motor pulley. This is the position for all speeds, since the speed is now controlled by the selector switch located on the front panel.
- Page 3 Then with a fine screwdriver you can finely adjust each speed independently. Technical Specifications Output Voltage 2 X 18 V AC two phase Output Current (max) 0,2 amps (Konstant III 2 X0.35 amps) Speed Correction range +/- 5% Max Voltage draw 30 VA (III 50 VA)
Need help?
Do you have a question about the KONSTANT and is the answer not in the manual?
Questions and answers