Cleaning Drain Pump Filter - Midea MA100W75 Owner's Manual

MAINTENANCE

Cleaning drain pump filter

Only for washers having these function
Warning!
• Be careful of the hot water!
• Allow detergent solution to cool down.
• Unplug the machine to avoid electrical shock before washing.
• Drain pump filter can filter the yarns and small foreign matters from the
washing.
• Clean the filter periodically to ensure the normal operation of washing
machine.
Drain the water out of the
pump, under which use a
container to collect.
Clean the filter.
Caution!
• Make sure that valve cap and emergency drain hose are reinstalled properly, cap
plates should be inserted aligning to hole plates otherwise water may leak;
• When the appliance is in use and depending on the program selected there can
be hot water in the pump. Never remove the pump cover during a wash cycle, always
wait until the appliance has finished the cycle, and is empty. When replacing the
cover, ensure it is securely re-tightened.
1
Open the filter by turning
to the counter clockwise
4
Restore it and adjust the convex
place to align at the pump hole.
.
2
5
19
10
Remove extraneous matter
Tighten the pump
cover clockwise.
3
6