Page 5
Step 1: Place the tabletop upside down. After that, use 5/16’’ x 5 ½’’ bolts (A) to attach the legs (2) to the tabletop (1). Each part has a series of numbers that indicate where to attach the part with the corresponding number. 5/16´´...
Page 6
Step 3: Use 5/16’’ x 5’’ bolts (D) to attach one table support (4) to the legs. Each part has a series of numbers that indicate where to attach the part with the corresponding number. 5/16´´ X 5´´ Bolts Step 4: Attach the bench supports (5) to the table support with 5/16’’ x 5’’ bolts (D). Each part has a series of numbers that indicate where to attach the part with the corresponding number.
Page 7
Step 5: Place the other table support (4) and attach with the bench and table support bolts previously used. Each part has a series of numbers that indicate where to attach the part with the corresponding number. Step 6: Finally, turn the table over its feet. After that, use 5/16’’ x 3 ½’’ bolts (E) to attach the benches (6) to the bench supports. Each part has a series of numbers that indicate where to attach the part with the corresponding number.
Page 8
This completes the Picnic Table assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't hesitate to call us (866 332 2403) or email us. We are here to support you. P| 7 CHRIS’S PICNIC TABLE (ATTACHED BENCHES) www.ForeverRedwood.com...