Teguar TP 40 Series User Manual
  1. Manuals
  2. Brands
  3. Teguar Manuals
  4. Touch Panel
  5. TP 40 Series
  6. User manual

Teguar TP 40 Series User Manual

Hardware system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER MANUAL
VERSION 4.0 March 2019
TP/TM-XX40
Panel PC
Hardware System

Advertisement

Table of Contents
loading

Related Manuals for Teguar TP 40 Series

Summary of Contents for Teguar TP 40 Series

  • Page 1 USER MANUAL VERSION 4.0 March 2019 TP/TM-XX40 Panel PC Hardware System...
  • Page 2 Copyright 2019 All Rights Reserved Manual Version 4.0 The information contained in this document is subject to change without notice. We make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. We shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
  • Page 3 Sécurité INSTRUCTIONS IMPORTANTES RELATIVES À LA SECURITE 1. Pour débrancher la machine de l’alimentation électrique, éteignez l’interrupteur d’alimentation et retirez le cordon d’alimentation de la prise murale. La prise murale doit être facilement accessible et à proximité de la machine. 2.
  • Page 4 CAUTION ON LITHIUM BATTERIES There is a danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions. Battery Caution Risk of explosion if battery is replaced by an incorrectly type. Dispose of used battery according to the local disposal instructions.
  • Page 5 Pour équipements mobiles ayant une masse totale supérieure à 18 kg et pour tous les équipements FIXES : Les matériaux d’un équipement coupe-feu dans l’épaisseur de paroi retenue la plus significativement mince, doivent être des matériels de CLASSE V-1, doivent être de classe Matériel 5VB ou doivent passer le test de l’article A.1 LEGISLATION AND WEEE SYMBOL 2012/19/EU Waste Electrical and Electronic Equipment Directive on the treatment,...
  • Page 6 Revision History Changes to the original user manual are listed below: Revision Description Date • Initial release April 2011 • IdeaCom touch driver installation added June 2011 • 3040 MB added March 2012 • 2040 MB added June 2012 • 2040 MB added June 2013 •...

  • Page 7: Table Of Contents

    Table of Contents 1. Packing List ........1 1-1. Standard Items ..............1 1-2. Optional Items ..............2 2. System View ........3 2-1. Front & Side View ............3 2-2. Rear View .................3 2-3. I/O view ................4 2-4. Dimensions ..............6 2-4-1. 15.6" System ..............6 2-4-2.
  • Page 8 5. Configuration ....... 18 5-1. 3040 Motherboard Layout ..........18 5-1-1. Motherboard Layout ............18 5-1-2. Connectors & Functions ..........19 5-1-3. Jumper Setting ..............20 5-2. 4040 V2.1 Motherboard Layout ........22 5-2-1. Motherboard Layout ............22 5-2-2. Connectors & Functions ..........23 5-2-3. Jumper Setting ..............24 5-3.
  • Page 9 The page is intentionally left blank .

  • Page 10: Packing List

    Packing List 1-1. Standard Items a. System b. Power adapter c. Power cord d. RJ45-DB9 cable (x2) e. Driver bank Note: Power cord will be supplied differently according to various region or country.

  • Page 11: Optional Items

    1-2. Optional Items...

  • Page 12: System View

    System View 2-1. Front & Side View 1. Touch screen 3. Ventilation 2. Built-in web cam 4. MSR cable hole 2-2. Rear View 5. VESA mounting holes 6. Cable cover 7. Safety label...

  • Page 13: I/O View

    2-3. I/O view 3040 Motherboard Item No. Description Mic in Line out COM4 USB 2.0(x4) COM port 1, 2, 3 (from left to right) DC in Power button DVI-D HDD slot USB 3.0(x2) *The location of the DVI port for K757 IO bracket is displayed as the red circle marked in the above figure.
  • Page 14 5040 Motherboard Item No. Description Mic in Line out COM4 USB 2.0(x2) COM port 1, 2, 3 (from left to right) DC in Power button DVI-D HDD slot USB 3.0(x4) 5040 Motherboard Item No. Description USB 2.0(x2) Mic in Line out USB 3.0(x4) COM port 1, 2 (from left to right) HDMI...

  • Page 15: Dimensions

    2-4. Dimensions 2-4-1. 15.6" System 396mm 48mm 2-4-2. 18.5" System 464mm 48mm 2-4-3. 21.5" System 536mm 48mm...

  • Page 16: System Assembly

    System Assembly 3-1. Open the Chassis Cover The motherboard and RAM module can be replaced by opening the chassis cover, which is located on the back side of the system. Please follow the steps below to open the chassis cover. 1.

  • Page 17: Ram Module Replacement

    3-2. RAM Module Replacement To remove and replace the RAM module, please open the chassis cover firstly as steps dscribed in chapter 3-1. Removing a RAM module 1. Find the memory slot at the right side of the motherboard. 2. Flip the ejector clips outwards to remove the memory module from the memory slot.

  • Page 18: Hdd Replacement

    3-3. HDD Replacement To remove and replace the HDD, please open the cable cover firstly as stpes dscribed in chapter 3-1-1. 1. Find the HDD located at the right side. 2. Pull the HDD tray from the system. For easier removal pull the plastic sheet (see picture) at the same time.

  • Page 19: Specification

    Specification Model Name TP-3040 Mainboard 3040 Intel Haswell CPU, LGA 1150pins, 22nm i7-4770TE 2.3G(Turbo 3.3G), LLC 8M, 45W i5-4570TE 2.7G(Turbo 3.3G), LLC 4M, 35W i3-4330TE 2.4G, LLC 3M, 35W Pentium G3320TE 2.3G, LLC 3M, 35W Celeron G1820TE 2.2G, LLC 2M, 35W Chipset Intel Lynx Point PCH Q87(AMT technology) System Memory...
  • Page 20 Model Name TP-3040 Mainboard 3040 Thermal Solution Thermal Solution 1 x Fan 2 x Fan Audio Speaker 2 x 2W Environment EMC & Safety FCC/CE Class A/LVD/EN 60601-1-2 Operating Temperature 0°C ~ 35°C (32°F ~ 95°F) Storage Temperature -20° ~ 60°C (-4°F ~ 140°F) Humidity 25% - 85% RH non-condensing Dust &...
  • Page 21 Model Name TP-4040 Mainboard 4040 Intel® BayTrail J1900 2.0G (Turbo 2.41G), L2 2M, 10W Chipset System Memory DDR3L, SO-DIMM x1 , FSB 1066 / 1333Mhz, max. 8G Graphic Memory Intel Gen7@>300MHz LAN controller (Giga LAN) Realtek RTL8111E-VL-CG 10/100/1000 BaseT LAN Audio controller Realtek ALC662VDO-GR NCT6106D...
  • Page 22 Model Name TP-4040 Mainboard 4040 Humidity 25% - 85% RH non-condensing Dust & Water Proof IP 54 (front panel) Dimensions 396 x 245 x 48 mm 464 x 284 x 48 mm 536 x 328 x 48 mm (W x D x H) Weight (N.W./G.W.) 4.5kg/5.5kg 6.8kg/7.8kg...
  • Page 23 Model Name TP-5040 Mainboard 5040 Intel SKYLAKE U CPU Celeron 3955U 2GHz, LLC 2M (15W) i3-6100U 2.3GHz, LLC 3M (15W) i5-6300U 2.4GHz Chipset SoC built-in CPU System Memory DDR3L1600MHz (8GB Max); 1 Channel Graphic Memory Intel Graphic (Gen 9) DX12, define on CPU LAN controller (Giga LAN) Realtek RTL8111E-VL-CG 10/100/1000 baseT LAN LCD/Touch Panel...
  • Page 24 Model Name TP-5040 Mainboard 5040 Humidity 25% - 85% RH non-condensing Dust & Water Proof IP 54 (front panel) Dimensions 396 x 245 x 48 mm 464 x 284 x 48 mm 536 x 328 x 48 mm (W x D x H) Weight (N.W./G.W.) 4.5kg/5.5kg 6.8kg/7.8kg...
  • Page 25 Model Name TM-5040 Mainboard 5040 Intel SKYLAKE U CPU Celeron 3955U 2GHz, LLC 2M (15W,EIA) (i3-6100U 2.3GHz, LLC 3M (15W, EIA)) i5-6300U 2.4GHz, LLC 3M (15W,IA) (i7-6600U 2.6GHz, LLC 4M (15W, EIA) Chipset System Memory DDR4 2133 MHz (32GB Max) ; 2 Channel Graphic Memory Intel Graphic (Gen 9) DX12, define on CPU LAN controller (Giga LAN)
  • Page 26 Model Name TM-5040 Mainboard 5040 DC 19V/90W Mfr.: MEAN WELL Enterprises Co., Ltd. Power Adapter Model: GSM90A19 I/P: 100-240Vac, 50/60 Hz, 1.3-0.6A Environment EMC & Safety FCC / CE Class B, LVD FCC / CE(EN55032:2010 + AC:2016 CLASS B) EN60601-1-2:2015 Standard: ANSI/AAMI ES60601-1 (2005/®2012 + A1:2012, C1:2009/( R)2012+ Certification...

  • Page 27: Configuration

    Configuration 5-1. 3040 Motherboard Layout 5-1-1. Motherboard Layout USB5 MINI_PCIE1 CN10 RJ45_1 CN24 USB3 CN13 CN12 CN14 USB1 CN16 CPU1 CN19 DDR3_A CN20...

  • Page 28: Connectors & Functions

    5-1-2. Connectors & Functions Connector Function SATA power connector Inverter connector LVDS connector CPU FAN connector System FAN connector HDD LED connector Speaker & MIC connector CN9/10 USB port (internal) CN11 Power LED connector CN12 40pin external connector CN13 EC Debug CN14 Printer connector CN15...

  • Page 29: Jumper Setting

    5-1-3. Jumper Setting Inverter Selection Function ▲LED CCFL COM1/COM2/COM3 Power Setting COM1, COM2 and COM3 can be set to provide power to your serial device. The voltage can be set to +5V or +12V in the BIOS. 1. Power on the system, and press the <DEL>...
  • Page 30 LCD ID Setting LVDS Output Panel# Resolution Bits Channel Interface LVDS 800 x 600 Single Panel LVDS 800 x 600 Single Panel LVDS 1024 x 768 Single Panel LVDS 1024 x 768 Single Panel LVDS 1366 x 768 Single Panel LVDS 1366 x 768 Single...

  • Page 31: 4040 V2.1 Motherboard Layout

    5-2. 4040 V2.1 Motherboard Layout 5-2-1. Motherboard Layout CN13 CN12 SATA1 CN14 USB2 CN24 RJ45_1 USB1 CN23 CN15 CN10 JP1 CN17 CN11 MINI_PCIE1 USB3 CN18 CN25 BAT1 CN19 DDR3_A1 CN20...

  • Page 32: Connectors & Functions

    5-2-2. Connectors & Functions Connector Function Front I/O board Inverter connector LVDS connector System FAN connector LPT port connector Speaker & MIC connector 40pin external connector CN10 HDD LED connector CN11 Power LED connector CN12 SATA power connector CN13/14 USB port (internal) CN15 PS2 keyboard connector CN17...

  • Page 33: Jumper Setting

    5-2-3. Jumper Setting Inverter Selection Function ▲LED CCFL COM1/COM2/COM3 Power Setting COM1, COM2 and COM3 can be set to provide power to your serial device. The voltage can be set to +5V or +12V in the BIOS. 1. Power on the system, and press the <DEL>...
  • Page 34 LCD ID Setting LVDS Output Panel# Resolution Bits Channel Interface LVDS 800 x 600 Single Panel LVDS 800 x 600 Single Panel LVDS 1024 x 768 Single Panel LVDS 1024 x 768 Single Panel LVDS 1366 x 768 Single Panel LVDS 1366 x 768 Single...

  • Page 35: 4040 V4.0 Motherboard Layout

    5-3. 4040 V4.0 Motherboard Layout 5-3-1. Motherboard Layout CN34 CN32 CN13 CN12 CN33 SATA1 CN31 USB2 RJ45_1 USB1 CN7 CN1 USB3 MINI_PCIE1 BAT1 CN19 DDR3_A1 CN27 CN29...

  • Page 36: Connectors & Functions

    5-3-2. Connectors & Functions Connector Function Internal USB connector CN1/CN13/CN21/CN29 EC Debug CPU FAN connector LPT connector 40Pin connector SATA power connector CN12 COM5 (touch) connector CN18 Wide range power connector CN19 S0/S5 LED & Power button connector CN25 51P connector CN26 eDP connector CN27...

  • Page 37: Jumper Setting

    5-3-3. Jumper Setting Cash Drawer Power Setting Function ▲+19V +12V COM1/COM2/COM3 Power Setting COM1, COM2 and COM3 can be set to provide power to your serial device. The voltage can be set to +5V or +12V in the BIOS. 1. Power on the system, and press the <DEL>...

  • Page 38: 5040 Motherboard

    5-4. 5040 Motherboard 5-4-1. Motherboard Layout SATA1 USB3 RJ45_1 SATA0 CN21 USB2 SKT1 CN19 CN22 CN15 USB1 CN23 MINI_PCIE1 CN10 CN20 SKT2 JP1 CN4 CN24 DDR3_A1 CN17 CN25...

  • Page 39: Connectors & Functions

    5-4-2. Connectors & Functions Connector Function Front I/O board Inverter connector LVDS connector HDD LED connector USB connector System FAN connector LPT port connector Smart device connector Debug port CN10 Speaker & MIC connector CN11 40 pin external connector CN12 Audio connector(right) CN13 Audio connector(left)

  • Page 40: Jumper Setting

    5-4-3. Jumper Setting Cash Drawer Power Setting Function ▲ +19V +12V COM1/COM2/COM3 Power Setting COM1, COM2 and COM3 can be set to provide power to your serial device. The voltage can be set to +5V or +12V in the BIOS. 1.
  • Page 41 LCD ID Setting LVDS Output Panel# Resolution Bits Channel Interface LVDS 800 x 600 Single Panel LVDS 800 x 600 Single Panel LVDS 1024 x 768 Single Panel LVDS 1024 x 768 Single Panel LVDS 1366 x 768 Single Panel LVDS 1366 x 768 Single...

  • Page 42: 5040 Motherboard

    5-5. 5040 Motherboard 5-5-1. Motherboard Layout CN16 CN11 CN28 CN27 MINI-PCIE1 SKT2 CN22 CN21 CN14 CN23 DIMM_A1 DIMM_B1 CN15 SKT1 CN17 CN19 CN13 CN18 CN12 CN26 CN20 CN25 CN10 FAN1 PCIE1 BAT1...

  • Page 43: Connectors & Functions

    5-5-2. Connectors & Functions Connector Function CN1/2 SATA power connector EC debug port Printer connector M.2 WiFi socket SDV connector CN8/9/10 USB2.0 connector CN11 COM4 connector CN12 Inverter connector CN13 eDP connector CN14 Bedside connector CN15 DP/HDMI Connector CN16 DICOM Connector CN17 DICOM for LVDS_VDD_EN CN18...

  • Page 44: Jumper Setting

    5-5-3. Jumper Setting Isolator USB(up port) speed select Function USB1.0 ▲ USB1.1 Isolator USB(down port) speed select Function USB1.0 ▲ USB1.1 Audio Mono select Function Mono ▲ Standard LCD ID Setting LVDS Output Panel# Resolution Bits Channel Interface LVDS 1920 x 1080 Dual Panel LVDS...
  • Page 45 COM1/COM2 Power Setting COM1, COM2 can be set to provide power to your serial device. The voltage can be set to +5V or +12V in the BIOS. 1. Power on the system, and press the <DEL> key when the system is booting up to enter the BIOS Setup utility.

This manual is also suitable for:

Tm 40 seriesTp-3040Tp-4040Tp-5040Tm-5040

Table of Contents