Wds - EnGenius ECB-3220 User Manual

11g Wireless Client Bridge/AP Version 1.36

5.4.5 WDS

Click on the WDS link under the Wireless menu. On this page you can configure the
WDS (Wireless Distribution System) which allows the Access Point to function as a
repeater.
Enable WDS: Place a check in this box to enable this feature.
Add WDS AP: Enter the MAC address of the Access Point that will join the WDS
network along with a comment about the AP.
Current WDS AP list: This table lists MAC addresses; you may delete selected
MAC address or delete all the addresses from the table by clicking on the associated
buttons.
Click on the Apply Changes button to confirm the changes. This device will
automatically restart once these changes have been applied.
Click on the Set Security button to configure the security settings.
48