Advertisement
Quick Links
Advertisement
Summary of Contents for BROSA Samui Outdoor Bar Stool Set of 4
- Page 1 Samui Outdoor Bar Stool Set of 4 A S S E M B LY G U I D E...
- Page 2 F O R Y O U R S A F E T Y Lift, don’t drag. This protects Check the assembly guide your floor and product. for required components. Assembly requires 2 people. Assembling this product on It's always easier with a a soft surface protects its friend.
- Page 3 Components Before you get started, check you have all of the pieces below. If anything’s missing, we’ll sort it out right away. Simply visit: www.brosa.com.au/pages/product-return-and-parts-request ① Body x 4 ② Footrest x 4 Hardware x 16 x 16 (M5 x 18) (Ø6 x Ø16 x 1)
- Page 4 Step 1 ② Align the footrest with the leg frame of the ① body as shown in the diagram below. ① ②...
- Page 5 Step 2 Fit a washer to a bolt and then insert the bolt into a hole. Only tighten the bolt with your hand at this stage. Repeat this for the remaining holes of the footrest.
- Page 6 Step 3 Once the footrest is fixed in place, tighten all bolts with the Allen key C.
- Page 7 Step 4 Repeat the process above for the rest of the stools. Enjoy your new Samui Outdoor Bar Stools!
- Page 8 User Recommendation Congratulations on your purchase from Brosa. We know you're going to love it and will want to keep it looking great for years to come! So please have a quick read-through of our handy tips below for ongoing care and maintenance of your new Brosa furniture.
- Page 9 is exposed to excessive humidity, particularly in locations near saltwater. Stainless Steel Regularly applying stainless steel cleaner removes oxidisation and helps restore a natural glossy finish in seconds. Cleaning will be needed on a regular basis in coastal areas, due to wind and salt exposure.
- Page 10 the direction of the wood grain. Repeat the process as necessary. Eucalyptus Keep standing water off your eucalyptus-wood furniture, and keep the furniture out of direct sunlight, which breaks down the surface layer of wood fibres and causes discolouration and finish failure. For regular cleaning, scrub the surface of the wood using a soft bristle brush, with a solution of bleach and water.