Advertisement
Quick Links
Advertisement
Summary of Contents for BROSA Cetus Tripod Table Lamp
- Page 1 Cetus Tripod Table Lamp A S S E M B LY G U I D E...
- Page 2 F O R Y O U R S A F E T Y Lift, don’t drag. This protects Check the assembly guide your floor and product. for required components. Assembly requires 1 person. Assembling this product on And it's always easier with a a soft surface protects its friend.
- Page 3 Safety MAX.40W 220-240V ~ 50Hz 1. For indoor use only. 2. Follow instructions carefully. Any deviations may be hazardous, or void your warranty. 3. The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed. 4.
- Page 4 Components Before you get started, check you have all of the pieces below. If anything’s missing, we’ll sort it out right away. Simply visit: www.brosa.com.au/pages/product-return-and-parts-request ② Shade x 1 ① ③ Lamp Body x 1 Leg x 3...
- Page 5 Step 1 ③ with the bottom of the lamp body ①. Align a leg Firmly screw them together. Repeat this for the remaining legs. ① ③...
- Page 6 Step 2 Unscrew the shade ring and remove it from the bulb holder.
- Page 7 Step 3 ② Attach the shade to the bulb holder. Attach the shade ring to the bulb holder again and screw it until the shade is tight and secure. ②...
- Page 8 Step 4 Gently screw the correct bulb (not included) into the bulb holder.
- Page 9 Step 5 Direct the light where you want it as the head is adjustable. Enjoy! We hope your new Cetus Tripod Table Lamp lights up your life!