Table of Contents
Advertisement
8.1.2. SPECIAL MODES SETTING
Mode name
TEST Mode
*All the main unit's parameters
(include tuner) are initialized.
Rating password
The audiovisual level setting
password is initialized to "Level
8".
Service Mode
Setting every kind of modes for
servicing.
*Details are described in "Service
Mode".
Forced disc eject
Removing a disc that cannot be
ejected.
The tray will open and unit will
shift to P-off mode.
*When Timer REC is ON or EXT-
LINK is ON, execute " Forced disc
eject " after releasing Timer REC
or EXT-LINK.
*This command is not effective
during "Child lock" is ON.
While Demonstration Lock is
being set, this Forced disc eject
function is not accepted.
If this command was executed
while TIMER REC is being set,
TIMER REC setting will be kept.
Child lock/unlock
Set or release "Child Lock".
NTSC/PAL system
To switch PAL/NTSC altemately.
select
Item
Description
FL display
The display before
execution leaves.
The display before
execution leaves.
28
Key operation
Front Key
Press [STOP], [CH UP]
and [OPEN/CLOSE] keys
simultaneously for five
seconds when power is
off.
Open the tray, and press
[REC] and [PLAY]
simultaneously for 5
seconds.
When the power is off,
press [CH UP], [OPEN/
CLOSE] and [REC] keys
simultaneously for 5
seconds.
When the power is off,
press [STOP] and [CH
keys simultaneously for
seconds.
Press [ENTER] and
[RETURN] by remote
controller simultaneously
until [X-HOLD] is
displayed.
While the power is on (
mode), press [STOP] and
[OPEN/CLOSE]
simultaneously for 5
seconds.
Advertisement
Table of Contents
