Table of Contents
Advertisement
REMOTE CONTROL BUTTONS & FEATURES
Power
SOURCE
Inserting Battery before using the Remote Control
1. Use a suitable coin to turn the remote control's battery cover
counterclockwise to remove it as shown in the figure below.
2. Insert a 3V lithium battery. Keep the positive (+) pole facing up when
inserting the battery. Put the battery cover on, and then align the '●'
marks side by side as shown in the figure below.
3. Use a suitable coin to turn the remote control battery cover clockwise
as far as it will go to fix it in place.
Controlling the Soundbar using Your TV Remote
Control
1. Press and hold the
the Soundbar is turned on.
2. "ON - TV REMOTE" appears on the Soundbar's display.
3. In the TV's menu, set the TV speaker to external speaker.
c Only the VOL +/- and
Soundbar.
c TV menus differ by manufacturer and model. Refer to the TV's user
manual for further information.
c This function is not available when the Soundbar is in the
TV SoundConnect mode.
c Manufacturers supporting this function:
VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA,
●
GRUNDIG, Hisense, RCA
This function may not be compatible with your TV's remote
●
depending on the remote control's manufacturer.
c To turn off this function, press the
"OFF - TV REMOTE" appears on the Soundbar's display.
Turns the Soundbar on and off.
Press to select a source connected to the Soundbar.
· 11 · English
SOUND button for more than 5 seconds while
buttons are available to control the
SOUND button for 5 seconds.
Advertisement
Table of Contents
