Download
Share
Print this page
Airone ANT081 User Manual
  1. Manuals
  2. Brands
  3. Airone Manuals
  4. Indoor Furnishing
  5. ANT081
  6. User manual

Airone ANT081 User Manual

Dual lens streaming video monitor mirror
Hide thumbs

Advertisement

Quick Links

Download this manual
AirOne ANT081 Dual Lens Streaming Video Monitor Mirror
User Manual
Dear Customer:
The product is a fully touch screen streaming video monitor mirror with DVR function from
BigerStone Corp.. It is based on the high performance hardware platform, stable and fluent
operation system, and effective HMI design which make the steaming video monitor mirror
more user-friendly, more functional, and not affecting the driving safety.
Notes:
Please do not disassemble, repair or replace the product in case the product do not run
normally, the artificial damage will not be accepted as warranty service and the repair fee
will be bound by the user.
Keep the camera clean, don't place anything blocking the view of the camera or else the
product may not work or may not be working properly.
Make sure the installation is properly done, and avoid beating or collision.
Be sure to use the power cable supplied in the factory package, for safety, do not use power
cable from other factory.
Add:10605 Concord Street Suite 440,Kensington MD.20895
Hot Line:+1.800.895.5280;
www.bigerstone.com
Page 1 of 13

Advertisement

loading
Need help?

Need help?

Do you have a question about the ANT081 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Airone ANT081

  • Page 1 AirOne ANT081 Dual Lens Streaming Video Monitor Mirror User Manual Dear Customer: The product is a fully touch screen streaming video monitor mirror with DVR function from BigerStone Corp.. It is based on the high performance hardware platform, stable and fluent operation system, and effective HMI design which make the steaming video monitor mirror more user-friendly, more functional, and not affecting the driving safety.

  • Page 2: Chapter 1：Product Specification

    Chapter 1：Product Specification 1.1 Product parameters Operation System Linux Display screen 9.88-inch IPS screen touch screen Resolution: 1600X400 Speaker Built-in,2W,8Ω G-sensor Three axis stereoscopic collision acceleration sensor Front camera:1296P Resolution Rear camera: 1296P TF Card Support TF high speed memory card(4G-32GB) Working voltage DC 12V Working current...
  • Page 3 1.2 Product interface Add:10605 Concord Street Suite 440,Kensington MD.20895 Hot Line:+1.800.895.5280; www.bigerstone.com Page 3 of 13...

  • Page 4: Chapter 3: Introduction Of Function

    2.1 Precautions for use 1. Be sure TF card is inserted in the card slot properly. 2. Do not insert or pull TF card when the product is working in case it is damaged. 3. Insert TF card with the correct side to avoid damage on TF card or the product. 4.
  • Page 5 right side to brighten the backlight with your finger.) Manual Mode: Click and turn off the Auto Brightness Mode, change the camera modes according to the change of light sensitivity value (you can only adjust the backlight brightness by touching the screen and sliding to left or right with your finger.) HOME page: click “Return”...
  • Page 6 Reversing Line Switch: click it to turn on/off the reversing line. Format: click it to format the storage card. All data in the card will be deleted and will be not recovered if you format the card. Video Switch: click it to start recording, red spot on the upper left corner of the screen flashing at the same time;...
  • Page 7 Click “Full Screen” to enter the full screen play mode. Click “Video Lock” to lock the file; unlock present file or all files. Click “Delete” can delete present or all files. Click “Volume” can adjust the volume of the product by sliding on the screen up and down.
  • Page 8 Time Watermark: Off, On (recommended). （ if watermark is on, video will show the time when you record the video, logo, longitude and latitude, and current speed, otherwise will not be shown.） G-sensor: Off (recommended), Low Sensitivity, Mid Sensitivity and High Sensitivity. (Videos recorded will be protected automatically when collision happens, if you set to Low Sensitivity, videos will be protected when the collision is severe;...

  • Page 9: General Setting

    Set to Off: the product will not power on to record if you set it to “off”, Set to Low Sensitivity: the product will power on to record and save the video if the car is hit strongly; Set to Mid Sensitivity: the product will power on to record and save the video if the car is hit not very strongly;...
  • Page 10 Product Device Code: Version: check the product firmware version, where display the software, hardware and front camera version, Time zone setting and Factory Reset. Time Zone Setting: Click to set the time zone. GPS Information: Position Status, Effective satellite number, Direction, Speed and GPS time. Add:10605 Concord Street Suite 440,Kensington MD.20895 Hot Line:+1.800.895.5280;...
  • Page 11 Factory Reset: If you click “Factory Reset”, reset the product to the default setting after click “OK”, click “Cancel” to cancel the order and return to the previous interface. Packing List ANT081 Host Unit User Manual Installation Tool Rear view Camera...
  • Page 12 Product Size: Add:10605 Concord Street Suite 440,Kensington MD.20895 Hot Line:+1.800.895.5280; www.bigerstone.com Page 12 of 13...
  • Page 13 ANT081 Product parameters: Mali 400 MP2 Memory DDR3:1GB/EMMC:16GB External Storage Support TF Card(maximum 32GB) Linux 9.88`` IPS/400*1600/MIPI DSI 4 Lane Capacitor Touch Screen/Sensor:GT911 Camera Front:1296P / Rear 1296P Build-in Speaker Build-in G-Sensor SC7A30E light Sensor PT850F3F Ublox external GPS module,interface:TTL serial,3.5mm Plug Front&Rear Recording,Backup Image,Parking Monitor,Collision...