Universal Tool UT8788 General Safety Information & Replacement Parts

Universal Tool UT8788 General Safety Information & Replacement Parts

6-in. dual action sander

Advertisement

Quick Links

Universal Tool
General Safety Information & Replacement Parts

TABLE OF CONTENTS

General Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Air Compressor and Air Tool Safety . . . . . . . . . . . . . . . . . . . 2-3
Tool Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Maintenance / Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Service Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
WARNING: Risk of injury to persons. Read and
understand operation instructions. Always become familiar
with all the instructions and warnings before operating any
pneumatic tool.
6-in. DUAL ACTION SANDER
: This product contains lead, a chemical known to
WARNING
the State of California to cause cancer and birth defects or
other reproductive harm. Wash hands after handling.
: This product contains chemicals known to
WARNING
the State of California to cause cancer and birth defects or
other reproductive harm. Wash hands after handling.
FLORIDA-PNEUMATIC.COM
Please contact 1-800-356-3392 for further assistance.
UT8788

Advertisement

Table of Contents
loading

Summary of Contents for Universal Tool UT8788

  • Page 1: Table Of Contents

    UT8788 Universal Tool 6-in. DUAL ACTION SANDER ™ General Safety Information & Replacement Parts TABLE OF CONTENTS General Safety Information ......2...
  • Page 2: General Safety Information

    • Whipping hoses can cause severe injury. Always check for dam- power. aged or loose hoses and fittings. • Make sure there are no electrical cables, gas pipes etc. that could • Whenever universal twist couplings (claw couplings) are used, lock cause a hazard if damaged by use of the tool. pins must be installed. • Do not exceed the maximum air pressure stated on the tool. 7.2.2.10 DUST AND FUME HAZARDS • Use whip check safety cables to safeguard against possible hose to • Dust from some work processes can cause cancer, birth defects or tool and hose to hose connection failure. other respiratory diseases. Risk assessment of these hazards and • Never carry an air tool by the hose. implementation of appropriate controls is essential. Universal Tool a Division of Florida-Pneumatic Manufacturing Corporation 851 Jupiter Park Lane, Jupiter FL 33458...
  • Page 3: Air Compressor And Air Tool Safety

    Pad Size Spindle Thread Weight Length Air Cons. Air Inlet Model No. Off-set Size (RPM) (in.) (in.) (lbs.) (in) (CFM) (in.) (in.) (in.) UT8788 10,000 5/16 - 24 3/16 2.25 10.5 1/4 NPT FLORIDA-PNEUMATIC.COM Please contact 1-800-356-3392 for further assistance.
  • Page 4: Installation

    □ Recommended lubricants: Air tool oil or any other high grade turbine oil containing moisture absorbent, rust inhibitors, metal wetting agents, and an EP (extreme pressure) additive. Universal Tool a Division of Florida-Pneumatic Manufacturing Corporation 851 Jupiter Park Lane, Jupiter FL 33458...
  • Page 5: Operation

    Operation Operating the sander Installing the sanding pad □ This Dual Action Sander is designed to operate on 90 PSIG. WARNING: Disconnect the tool from the air source before Lower pressure (below 90 PSIG) will reduce performance servicing or changing any accessories. of the tool.
  • Page 6: Troubleshooting

    Warranty Limited Warranty: Universal Tool warrants its tools to be free from defects in material and workmanship for one year from the date of purchase. This warranty does not apply to tools which have been abused, misused, modified or repaired by someone other than Universal Tool or its authorized service centers.
  • Page 7: Service Parts

    Service Parts / Exploded View Drawing Part Number Description Part Number Description Qty. 9HS501-1 HOUSING (RED) 92HS-23 ROTOR BLADE 9HS502 LEVER (BLACK) 9ST2HG-27B CYLINDER 9A-05 VALVE STEM 9ST246014 9OB-04 O-RING 981326 9HS505 BUSHING 9OB-24 O-RING 9HS506 REGULATOR (BLACK) 9STOB-25 FRONT PLATE 9OB-02 O-RING 9OB-26A...
  • Page 8 Universal Tool ™ Questions, problems, missing parts? Call Customer Service 8 a.m.-5 p.m., EST, Monday-Friday 1-800-356-3392 FLORIDA-PNEUMATIC.COM Retain this manual for future use. Universal Tool a Division of Florida-Pneumatic Manufacturing Corporation 851 Jupiter Park Lane, Jupiter FL 33458...

Table of Contents