Page 2
1.0 INTRODUCTION The Model 360 has been designed to detect Carbon Dioxide in Air and to signal an alarm event above the level defined on the calibration certificate (normally 0.5% by volume in Air). The Model 360 utilizes a highly sensitive solid electrolyte sensor which is operated and monitored by microprocessor.
Page 3
LED will extinguish, the sounder will stop operating the relay and repeater(if fitted) will change back to their original state. Note: The detector will not reset when in alarm condition. 6.0 SPECIFICATION -Model 360 - Carbon Dioxide Detector Power Supply Mains driven or DC...
Need help?
Do you have a question about the 360 and is the answer not in the manual?
Questions and answers