Advertisement
R
F
O
R
F
O
Congratulations on your purchasing this exciting wireless radio frequency optical mouse. This
multi-function optical mouse is with great features, the wheel for quick scrolling and two side
buttons for extra functions (if with 5 keys). Beside, this optical mouse uses optical sensor instead
of mouse ball. The precise sensor detects motion on hundreds of surfaces, including wood, plastic,
or even your pants leg, and prevents you from the interference caused by dust. All those
human-oriented characteristics make you feel more comfortable and efficient while surfing on
the website or using applications. After the KeyMaestro Mouse Driver installed, you will have
seven extra functions to select for buttons- Quick Jump, Double Click, Window Zoom, Switch
AP, Auto Panning, Back and Forward. Moreover, the Quick Jump button is bonded with most
often-used functions, Mouse Control Panel, Control Panel, Horizontal Scroll Bar, Vertical Scroll
Bar, Minimize All Windows, Size Grip, Windows Explorer, Recall the Last Active Window and
Exit. Please install the KeyMaestro Mouse Driver to find more great functions!
System Requirements
! Microsoft® Windows®NT 4.0, Windows®95, Windows®98, Windows®ME,
Windows®2000 or Windows®XP operating system
Hardware Installation
Connect the Receiver to Your PC System
1. Turn off your PC system. Remember to turn off your PC
system before you connect or disconnect the receiver.
2. For PS/2 model, you can connect the receiver to the PS/2
port.
3. Take the mouse and make sure the batteries on the back are
installed correctly. (Follow the polarity signs in the battery
compartment.)
4. Turn on your PC system.
ID Setting
This wireless optical mouse contains 256 sets ID. This extra ID-recognition function helps to
protect against interference from other RF mouse in the same environment. After completing the
hardware installation, you must set the ID of the receiver and mouse.
1. Press the ID button on the side of the receiver once.
2. Press the ID button on the bottom of the mouse once.
ID Button
ID setting button of Receiver
p
t
i
c
a
l
M
o
u
s
e
Q
p
t
i
c
a
l
M
o
u
s
e
1/1
u
i
c
k
G
u
i
d
e
Q
u
i
c
k
G
u
i
d
e
PS2 Mouse Port
ID Button
Mouse Battery Compartment
ID setting button of Mouse
ID Button
Advertisement
Table of Contents
Related Manuals for Emprex M960M
Summary of Contents for Emprex M960M
-
Page 1: System Requirements
(if with 5 keys). Beside, this optical mouse uses optical sensor instead of mouse ball. The precise sensor detects motion on hundreds of surfaces, including wood, plastic, or even your pants leg, and prevents you from the interference caused by dust. -
Page 2: Software Installation
Battery Low Alarm After installing the KeyMaestro Mouse Driver, computer will display a battery low icon the upper-right corner of your screen and flash for 10 seconds to indicate low batteries in the unit. Please change the batteries. After changing the batteries, remember to set ID settings.
Need help?
Do you have a question about the M960M and is the answer not in the manual?
Questions and answers