Download Print this page

Photoflex LiteIgloo Series Instructions page 2

Advertisement

LiteIgloo
Figure 10
Figure 11
Figure 12
Figure 13
Figure 15
For detailed specifications,
product tutorial videos
Family Instructions • Item #: 870295DP (MC1975)/ 870289(DP-LC3150)
®
Figure 14
Figure16
and more, please visit www.photoflex
Positioning the Camera
10. The front of the LiteIgloo has two (2) sewn-on, hinged doors
with Velcro® tabs on the top, bottom and middle of the inside
edge. This allows the camera to be positioned high, low and
center. the Velcro on the inside edge allows the doors to be
closed when the camera is set high or low. Figure 10
11. The door can be held open with the sewn-on Vecro to the
sides of the LiteIgloo. Either or both doors can be held open.
This allows shooting off center of the LiteIgloo. Figure 11
Sweep Installation (optional)
12. The LiteIgloo comes with a blue sweep and a white sweep for
shooting seamless backgrounds.
Velcro tabs are sewn on the inside of the LiteIgloo forpositioning
the sweeps. Figure 12
Lighting the LiteIgloo
13. This is a typical set up for shooting items in the LiteIgloo. Figure 13
Visit www.Photoflex.com to view lessons on using the LiteIgloo
and placing the lights for optimal performance.
Folding the LiteIgloo
14-16. To fold the LiteIgloo, push one edge of the box to the opposite
edge and then fold the box onto itself.
Large LiteIgloo Only:
The large LiteIgloo can be folded further by grabbing the opposite
edges of the flat folded frame and twisting the frame to fold onto itself.
Customer Support (831) 786-1370
E-mail: sales@photoflex.com
Photoflex is a division of PromarkBRANDS, Bartlett, IL USA.
©2016 ALL RIGHTS RESERVED. FirstStudio
are trademarks or registered trademarks of Photoflex and/or its affiliates in the U.S. and
other countries.
PHOTOFLEX
• Warranties only cover manufacturer's defects and workmanship.
• We reserve the right to inspect all merchandise returned (end
users and dealers) for warranty fulfillment.
• All returns must be pre-approved with Return Manufacturers
Authorization obtained from Photoflex/PromarkBRANDS.
• A receipt showing date of purchase will be required for all returns.
• Freight must be paid by the customer or dealer.
• Warranties are valid only from date of Original Purchase.
®
.com
Figures 14 – 16
®
, LiteIgloo
®
, Photoflex
®
WARRANTY
®
and the Photoflex logo
Rev 8/2016

Advertisement

loading

This manual is also suitable for:

870295870289Dp-mc1975Dp-lc3150