Photoflex LiteIgloo Series Instructions

LiteIgloo
Figure 1
Figure 3
Figure 5
Figure 7
Figure 9
For detailed specifications, product tutorial videos
Family Instructions • Item #: 870295 (DP-MC1975) / 870289 (DP-LC3150)
®
Figure 2
Figure 4
Figure 6
Figure 8
and more, please visit www.photoflex
FirstStudio LiteIgloo
®
The FirstStudio LiteIgloo is a tabletop shooting enclosure for achieving
soft, nearly shadowless lighting when shooting items for catalogs,
promotion and online auction. Each LiteIgloo comes with removable
white and blue sweeps for shooting on seamless backgrounds.
This manual covers:
• Opening the LiteIgloo
• Positioning the camera
• Sweep instructions (optional)
• Lighting the LiteIgloo
• Folding the LiteIgloo
Opening the LiteIgloo
1. Open the protective carrying bag.
2. Remove the LiteIgloo from the protective carry bag
Large LiteIgloo only: The large size comes folded in layers to
1/3 its size. Just pull the layers apart and the box will pop
open flat.
3. The sidewalls are stack folded into two layers.
4. Pull one layer edge away from the other layer.
5. The box is now opened half way.
6. Grab the box frame at the inside corner and pull out.
7. The LiteIgloo will open fully.
8. Position the box on your shooting surface. The front of the
LiteIgloo (with the port doors) should sit close to the front of
the shooting surface so that the camera lens can be positioned
close to the doors' opening.
9. The LiteIgloo completely open.
® .com
Figures 1-9
Rev 8/2016