Panasonic TX-40EX700E Operating Instructions Manual page 19

Common Interface
Turn the TV off with Mains Power On / Off switch
whenever inserting or removing the CI module.
If a smart card and a CI module come as a set, first
insert the CI module, then insert the smart card into
the CI module.
Insert or remove the CI module completely in the
correct direction as shown.
Normally encrypted channels will appear. (Viewable
channels and their features depend on the CI
module.)
If encrypted channels do not appear
[Common Interface] in the Setup Menu
There might be some CI modules in the market
with older firmware versions that do not work fully
interoperable with this new CI+ v1.3 TV. In this case,
please contact your content provider.
For details, refer to [eHELP] (Search by Purpose >
Functions > Common Interface), read the manual of
the CI module, or check with the content provider.
TV
USB HDD (for recording)
Use USB 1 port for connecting the USB HDD.
For details, refer to [eHELP] (Search by Purpose >
Recording).
VIERA Link
Use HDMI1 - 3 for VIERA Link connection.
For details, refer to [eHELP] (Search by Purpose >
Functions > VIERA Link "HDAVI Control™").
CI module
Cable arrangement
Fix the cables using the cable tie, and then attach the
cable cover / terminal cover to the TV.
Fixing the cables using the cable tie
40-inch model
50-inch model 58-inch model
Attach the cable tie
Insert the cable tie in a hole
Bundle the cables
Set the tip in the hooks
Hooks
To loosen:
Keep pushing the knob
Knob
To remove from the TV:
Snaps
Keep pushing both side snaps
65-inch model
Hole
English
19