1. Manuals
  2. Brands
  3. Aquanami Manuals
  4. Boat
  5. JETANGLER
  6. Operator's manual

Aquanami JETANGLER Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
AQUANAMI
2016
OPERATOR'S
GUIDE
Includes Safety, Watercraft and
Maintenance Information
JETANGLER

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JETANGLER and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Aquanami JETANGLER

Summary of Contents for Aquanami JETANGLER

  • Page 1 AQUANAMI 2016 OPERATOR’S GUIDE Includes Safety, Watercraft and Maintenance Information JETANGLER...
  • Page 2 AQUANAMI, LLC., 809 Grandview Drive, Hampstead, NC 28443, USA.

  • Page 3: Forward

    FOREWORD Congratulations on your purchase of a new AQUANAMI watercraft. It is backed by the AQUANAMI warranty and authorized AQUANAMI dealers ready to provide the parts, service or accessories you may require. Your dealer is committed to your satisfaction. He has taken training to perform the initial setup and inspection of your watercraft as well as completed the final adjustment before you took possession.

  • Page 4: Safety Messages

    Due to late changes, some differences between the manufactured product and the descriptions and/or specifications in this guide may occur. AQUANAMI reserves the right at any time to discontinue or change specifications, designs, features, models or equipment without incurring any obligation upon itself.

  • Page 5: Table Of Contents

    TABLE OF CONTENTS FORWARD ............................1 Know Before You Go........................1 Safety Messages ..........................2 About this Operator's Guide ......................2 TABLE OF CONTENTS .......................... 3 SAFETY INFORMATION .......................... 7 GENERAL PRECAUTIONS ........................8 Avoid Carbon Monoxide Poisoning ....................8 Avoid Gasoline Fires and Other Hazards ..................
  • Page 6 Navigation System ........................23 Collision Avoidance ........................23 FUELING ............................24 Fuel Requirements ........................25 Recommended Fuel ........................26 ON-PRODUCT LABELS ........................27 Watercraft Safety Labels ......................27 Compliance Labels ........................30 PRE-RIDE INSPECTION ........................32 What to Do Before Launching the Watercraft ................32 What to Do After Launching the Watercraft .................
  • Page 7 MAINTENANCE INFORMATION......................65 MAINTENANCE SCHEDULE ........................ 66 MAINTENANCE PROCEDURES ......................70 General Inspection ........................70 Cleaning ............................71 Lubrication and Anticorrosion Protection ..................71 Engine ............................72 Exhaust System ..........................74 Cooling System ..........................75 Fuel System ..........................76 Electric System ..........................76 WATERCRAFT CARE ..........................
  • Page 8 SPECIFICATION ..........................98 TROUBLESHOOTING .......................... 100 TROUBLESHOOTING GUIDELINES ....................101 WARRANTY............................104 AQUANAMI LIMITED WARRANTY ....................104 US EPA EMISSION-RELATED WARRANTY ..................109 CUSTOMER INFORMATION ........................ 111 - 6 -...

  • Page 9: Safety Information

    SAFETY INFORMATION - 7 -...

  • Page 10: General Precautions

    GENERAL PRECAUTIONS Avoid Carbon Monoxide Poisoning All engine exhaust contains carbon monoxide, a deadly gas. Breathing carbon monoxide can cause headaches, dizziness, drowsiness, nausea, confusion and eventually death. Carbon monoxide is a colorless, odorless, tasteless gas that may be present even if you do not see or smell any engine exhaust. Deadly levels of carbon monoxide can collect rapidly, and you can quickly be overcome and unable to save yourself.

  • Page 11: Avoid Burns From Hot Parts

    Do not make unauthorized modifications, or use accessories that are not approved by AQUANAMI. Since these changes have not been tested by AQUANAMI, they may increase the risk of accidents or injuries, and they can make the watercraft illegal for use on water.

  • Page 12: Special Safety Messages

    SPECIAL SAFETY MESSAGES Reminders Regarding Safe Operation The performance of this watercraft may significantly exceed that of other watercraft you may have operated. Make sure you read and understand the content of this Operator's Guide to become completely familiar with the controls and operation of the watercraft before embarking on your first trip, or taking on a passenger.

  • Page 13: Before Getting Underway

    confined area or allow CO to accumulate around the watercraft, or in enclosed or sheltered areas such as when docked, or when rafting. Know the waters in which the watercraft is to be operated. Current, tides, rapids, hidden obstacles, wakes and waves etc. can affect safe operation. It is not advisable to operate the watercraft in rough waters or inclement weather.

  • Page 14: Operator And Passenger Awareness

    Regularly inspect the watercraft, hull, engine, safety equipment, and all other boating gear and keep them in safe operating condition. Be sure you have the minimum required safety equipment, PFDs and any additional gear needed for your cruise. Ensure that all lifesaving equipment, including fire extinguisher (not supplied with vehicle), are in safe operating condition and easily accessible.

  • Page 15: Drugs And Alcohol

    Always properly use the tether cord when operating the watercraft. Ensure that any operator and passenger know how to swim and how to reboard the watercraft from the water. Boarding in deep water can be strenuous. Practice in chest-deep water before operating or embarking your watercraft in deep water.

  • Page 16: Hypothermia

    and alcohol, singly or in combination, decreases reaction time, impedes judgment, impairs vision, and inhibits your ability to safely operate a watercraft. Hypothermia Hypothermia, the loss of body heat resulting in a subnormal body temperature, is a significant cause of death in boating accidents. After an individual has succumbed to hypothermia, he or she will lose consciousness and then drown.

  • Page 17: Safe Boating Courses

    If there is more than one person in the water, huddling together is recommended. This action tends to reduce the rate of heat loss and thus increase the survival time. Always wear your PFD. It won't help you fight off the effects of hypothermia if you don't have it on when you go into the water.

  • Page 18: Safety Equipment

    SAFETY EQUIPMENT Required Safety Equipment The operator and the passenger must wear an approved Personal Flotation Device (PDF) that is suitable for PWC use. As the owner of the watercraft, you are responsible for assuring that all required safety equipment is aboard. You should also consider supplying additional equipment as needed for your safety and that of your passenger.

  • Page 19: Personal Flotation Devices (Pfds)

    Footwear. Some type of lightweight, flexible foot protection is recommended. This will help reduce possible injury, should you step on sharp underwater objects. Personal Flotation Devices (PFDs) Each person on a recreational watercraft must wear a personal flotation device (PFD) at all times.

  • Page 20: Practice Exercises

    PRACTICE EXERCISES It is always a good idea to practice and get familiar with all controls, functions and handling characteristics of your watercraft before venturing on the water. Always secure the tether cord to the engine cut-off switch and the clip to your PFD or a wrist strap.

  • Page 21: Important Factors Not To Neglect

    Practice stopping the watercraft in a straight line at different speeds. Remember, water drag is the main factor which reduces the watercraft speed and thus the stopping distance. NOTE: The watercraft speed, load, current and wind also play an important role in affecting stopping distances.
  • Page 22 Make sure to be alert to these conditions, and adapt accordingly. If possible, practice further in these conditions. For delicate maneuvers, the best advice is always to try to reduce your speed to minimum. - 20 -...

  • Page 23: Navigation Rules

    NAVIGATION RULES Operating Rules Operating a watercraft can be compared with driving on unmarked highways and roads. To prevent collisions or avoid other boaters, a system of operating rules must be followed. It’s not only common sense, it’s the law! Generally keep to your right and safely avoid collisions by keeping a safe distance from other watercraft, boats, people and objects.
  • Page 24 - 22 -...

  • Page 25: Navigation System

    Navigation System Navigational aids, such as signs or buoys, can assist you in identifying safe waters. Buoys will indicate whether you should keep to the right (starboard) or to the left (port) of the buoy, or to which channel you can continue. They may also indicate whether you are entering a restricted or controlled area such as a no wake or low speed zone.

  • Page 26: Fueling

    FUELING Always verify fuel level before use and during the ride. Always stop the engine before fueling and never allow anyone to remain on the watercraft while fueling. Always remember that fuel is flammable and explosive under certain conditions. Do not smoke or allow open flames or sparks in the vicinity. - 24 -...

  • Page 27: Fuel Requirements

    After refueling, always ensure there is no gasoline vapor odor inside the engine compartment. Fuel Requirements NOTICE: Always use fresh gasoline. Gasoline will oxidize; the result is loss of octane, volatile compounds, and the production of gum and varnish deposits which can damage the fuel system.

  • Page 28: Recommended Fuel

    Recommended Fuel NOTICE: Never experiment with other fuels. Engine or fuel system damages may occur with the use of an inadequate fuel. - 26 -...

  • Page 29: On-Product Labels

    Watercraft Safety Labels The following labels are on your watercraft. If missing or damaged, the labels can be replaced free of charge. See an authorized AQUANAMI dealer. Please read the following labels carefully before operating this watercraft. NOTE: In the event of any discrepancy between this guide and the watercraft, the safety labels on the watercraft have precedence over the labels in this guide.
  • Page 30 Label 2 Label 3 Label 4 - 28 -...
  • Page 31 Label 5 Label 6 - 29 -...

  • Page 32: Compliance Labels

    Compliance Labels Label 7 Label 8 - 30 -...
  • Page 33 Label 9 Label 10 - 31 -...

  • Page 34: Pre-Ride Inspection

    PRE-RIDE INSPECTION Before performing the pre-ride inspection, read and understand the CONTROLS section. What to Do Before Launching the Watercraft - 32 -...
  • Page 35 Check the items listed in the following table before launching the watercraft Check TO DO ITEM Start and Stop buttons Check operation. Safety Lanyard Check operation. Throttle Check operation. Steering system Check operation. Check by-pass outlet. Water mist/drops should come Exhaust pipe cooling out exhaust by-pass outlet.
  • Page 36 CAUTION: To ensure it is properly working, check by-pass outlet. Water mist/drops should come out exhaust by-pass outlet. If the exhaust from the by-pass is not wet, stop engine and consult your AQUANAMI Dealer. The exhaust pipe is cooled by the - 34 -...
  • Page 37 water from the jet pump. If the water flow from jet pump to exhaust pipe is blocked, the exhaust pipe and connecting components could be damaged. CAUTION: Never run the engine without supplying water to the cooling system when watercraft is out of water. If out of water, level the craft. Install a garden hose to the flushing connector, which is also the cooling water exit port when watercraft operates on water.
  • Page 38 With the watercraft horizontal, fill the fuel tank. Refer to FUELING section for checking fueling. Engine Compartment Check if any water exists. Check if any signs of water leak. Check fuel line connections for tightness. Verify for any fuel leak/odor as well as oil and coolant leaks. Check any loosen parts.
  • Page 39 Clean as necessary. If any obstruction can not be removed, refer to an authorized Aquanami dealer for servicing. Inspect leading edges of the impeller, if they have nicks or bends performance will be greatly reduced.

  • Page 40: What To Do After Launching The Watercraft

    What to Do After Launching the Watercraft Check the item listed in the following table after launching the watercraft and before going for a ride. ITEM Check TO DO Gauges Check operation. Gauges Press engine START/STOP button and install the tether cord capon the engine cut-off switch.

  • Page 41: Watercraft Information

    WATERCRAFT INFORMATION - 39 -...

  • Page 42: Control

    CONTROLS 1. Main Switch: The main switch turns on/off power supply from battery to the watercraft electric system. Engine can not be started when the main switch is off. Always turns off the main switch when the watercraft is not in operation to prevent battery drain.
  • Page 43 5. Throttle Lever: When the throttle lever is pulled, the watercraft accelerates. When fully released, engine automatically slows down to idle speed and watercraft is gradually slowed down by water drag. To increase or maintain watercraft speed, pull on the throttle lever with your finger.
  • Page 44 8. Information Gauges: When tether cord is plugged in and the start button is depressed once, the information gauges read engine RPM, fuel level and battery life. The engine run hour gauge is inside engine compartment. Once stop button is depressed or Tether Cord is pulled off, all the gauges will be turned off.

  • Page 45: Equipment

    EQUIPMENT 10. Cc 11. Ccc 12. Ccc 10. Rubber Pumper: The rubber pumper provides protection to hull. 11. Under Deck Storage: Open storage covers to access the long and specious under deck storage. - 43 -...
  • Page 46 12. Handle: The moving handle can be used to lift the watercraft. It provides a handhold for the operator and a passenger to hold on to when riding. 13. Foot Brace: The foot brace provides foot support. 14. Passenger Seat: The soft passenger seat. 15.
  • Page 47 19. Hull Joint Seam Tape: The hull joint seam tape provides the protection for watercraft hull. 20. Rear Eyelet: Eyelets can be used for mooring and as tie-down points when trailering your watercraft. 21. Control Station: The control station is where steering handle, main switch, cut-off switch, start/stop switches and information gauges located.
  • Page 48 b. Use this connector to flush the heat exchanger, cooling water passage and exhaust system during cleaning; c. Provide cooling water for engine and exhaust system when running the engine out of water. 27. Exhaust By-Pass Outlet: The engine exhaust emits from this exhaust by-pass outlet at idle speed.
  • Page 49 33. Steering Nozzle: Steering nozzle turns left and right by operating steering handle. 34. Steering Nozzle Linkage: The steering nozzle pivoting linkage turns steering nozzle left and right by operating steering handle. 35. Bilge Drain Plug: Unscrew drain plug whenever watercraft is on the trailer. This will allow water accumulated in the bilge to be evacuated and helps to reduce condensation.
  • Page 50 38. Ride Plate: The ride plate can be adjusted by inserting a pair of shims between the ride plate and the hull. This allows the rider to adjust the height that the front of the watercraft is out of the water. A pair of 5 mm shims and a pair of 10 mm shims are supplied.
  • Page 51 39. Engine Compartment Opening Seal: The seal fills the gap between engine compartment cover and the engine compartment opening. 40. Exhaust pipe: Cooling water flows through the double walled exhaust pipe, enters the water box. 41. Carburetor: It regulates the flow of air and fuel mix into the engine cylinder. 42.
  • Page 52 44. Electronic Control Module: It holds CDI and other electronic components. 45. Battery Tie: It holds the battery in place. 46. Battery: Ensure to connect the battery with correct “+” and “-” terminals. Refer to MAINTENANCE section for battery charging and maintenance. 47.
  • Page 53 53. Fuel filter. 54. Fuel Tank. 55. Fuel pick-up and fuel sensor assembly: The fuel pick up hose and fuel sensor are inside the fuel tank. 56. Engine Coolant Expansion Bottle: When engine temperature rises, the engine coolant expands, the expanded coolant flows to the expansion bottle. When engine cools down, the coolant in the expansion bottle is drawn back to the engine.
  • Page 54 60. Engine Breathing Oil Retainer: It retains oil mist and oil from engine breathing path. Check the bottle periodically and clean any oil residue to keep engine breathing freely. To drain the oil/water in the retainer bottle, simply pull off the hose from the middle nozzle of the bottle, and let the water/oil drain out from the bottom nozzle through the hose to a cup.
  • Page 55 65. Drive Shaft to Hull Seal Boot. 66. Fresh Water Supply Hose: It supplies fresh water from jet pump to cool heat exchanger and exhaust system. 67. Siphon Hose: It connects siphon pump head to jet pump. Siphon pump head evacuates water in bilge by the low pressure generated in jet pump.

  • Page 56: Break-In Period

    HOURS OPERATION BY AN AUTHORIZED AQUANAMI DEALER! It is highly recommended that after the first 10 hours of operation, the watercraft be checked by an authorized Aquanami dealer. This inspection will also provide the opportunity to discuss the unanswered questions you may have encountered during the first hours of operation.

  • Page 57: Operating Instructions

    OPERATING INSTRUCTIONS Should any control or instruction not be fully understood, refer to an authorized Aquanami dealer. Propulsion Principle The engine is directly coupled to the drive shaft which, in turn, rotates the impeller. The water is drawn up from the jet pump water intake grate underneath the watercraft, then flows through the impeller to the venturi.

  • Page 58: Turn Left And Right

    Turn Left and Right Turning the steering handle pivots the jet pump nozzle which controls the watercraft direction. Turning the handle to the left will turn the watercraft to the left and inversely. The throttle should be applied to turn the watercraft. CAUTION: Combustion engines need air to operate;...

  • Page 59: Starting Engine

    CAUTION: Starting the engine or operating the watercraft in shallow water can draw sand, pebbles, or rocks through the jet pump, which might damage the impeller or other pump components. Boarding in Deep Water Swim to the side or front of the watercraft. Put your hands on the board and pull yourself up then get on.

  • Page 60: Riding

    4) Depress the engine START button to crank the engine. 5) Release engine START button immediately after engine is started. 6) If engine fails to start after 15 seconds, wait a few seconds then repeat procedure. NOTES: This engine is designed to start with NO need to depress throttle. First time use of the watercraft takes longer time or repeated procedures to allow the fuel pump to draw fuel from fuel tank to carburetor first.

  • Page 61: Stopping/Docking

    Stopping/Docking The watercraft is slowed down by water drag. The stopping distance will vary depending on weight, speed, water surface condition, presence and direction of wind and current. The rider should become familiarized with the stopping distance under different conditions. Release the throttle at a sufficient distance before the expected docking area.

  • Page 62: Special Procedures

    SPECIAL PROCEDURES Water in Carburetor Once water gets into carburetor bowl, engine will not work properly. It may loose power and suddenly stop when you depress throttle lever, or you may not be able to start the engine. When it happens, drain carburetor and fuel water separator bottle. Use a flat screw driver to loose the carburetor drain screw 62 to drain the water or contaminated fuel in the carburetor bowl.

  • Page 63: Fuel-Flooded Engine

    30 minutes, clean spark plug or using a new spark plug, try to start engine. 2) If the engine continues to flood, see an authorized Aquanami dealer. CAUTION: Never run engine for more than 30 seconds without supplying water to the exhaust cooling system and heat exchanger when watercraft is out of water.

  • Page 64: Jet Pump Water Intake And Impeller Cleaning

    If system is still blocked, move the watercraft out of the water and remove blockage manually. CAUTION: Inspect water intake grate and impeller for damage. Refer to an authorized Aquanami dealer for repair as necessary. - 62 -...

  • Page 65: Capsized Watercraft

    Capsized Watercraft The watercraft is designed so that it should not turn over easily. If watercraft turns over, it will remain capsized. To return the watercraft upright, ensure the engine is off and the Lanyard is NOT on its post. In shallow water, lift one side of the watercraft to upright.

  • Page 66: Submerged Watercraft

    Bring the watercraft to be serviced by an authorized Aquanami dealer as soon as possible. CAUTION: The longer the delay before you have the engine serviced, the greater the damage to the engine will be.

  • Page 67: Maintenance Information

    MAINTENANCE INFORMATION - 65 -...

  • Page 68: Maintenance Schedule

    These instructions do not require components or service by AQUANAMI or authorized AQUANAMI dealers. Although an authorized AQUANAMI dealer has in-depth technical knowledge and tools to service the AQUANAMI watercraft, the emission-related warranty is not conditioned on the use of an authorized AQUANAMI dealer or any other establishment with which AQUANAMI has a commercial relationship.
  • Page 69 Maintenance is critical for the safety and longevity of this product. If you are not familiar with safe service practices and adjustment procedures, see your authorized Aquanami dealer. In many instances proper tools and training are required for certain servicing or repair procedures.
  • Page 70 Watercraft Maintenance Chart Every Every 50 hours or hours or First 10 PART/TASK hours months months Note ENGINE (1) Check oil level daily Engine oil and filter before use. (2) Change oil and oil Corrosion protection filter if the watercraft (spray an anti-corrosion capsizes or water lubricant to metallic...
  • Page 71 ELECTRICAL Spark plug Battery and fasteners (1) By repair shop. Electric connectors and (2) Inspect once per fasteners month. Engine cut-off switch and (3) Daily rinse and clean stop switch water sensor switch after Main switch salt water use. Bilge pump automatic C, I sensor switch Bilge pump and manual...

  • Page 72: Maintenance Procedures

    MAINTENANCE PROCEDURES This section includes instructions for basic maintenance procedures. General Inspection Check engine compartment for any damage and for leaks of fuel, coolant or oil. Ensure all hose clamps are properly secured and no hose is cracked, kinked or presenting any other damage.

  • Page 73: Cleaning

    Throttle lever should return to its initial position without any hesitation. There must be a small amount of free-play when throttle lever is released. Refer to an authorized Aquanami dealer if necessary. Electrical Connections As necessary, apply an anti-corrosion product such as dielectric grease on battery posts and all exposed cable connectors.

  • Page 74: Engine

    Metallic Components in Engine Compartment Spray an anti-corrosion lubricant to metallic components in engine compartment for corrosion protection according to Maintenance Chart. For salt water use, spray an anti- corrosion lubricant to metallic components in engine compartment every 10 hours in salt water use.
  • Page 75 2. Wait for 2 minutes then recheck the oil level. This is required to allow the oil to flow evenly in the oil chambers and to prevent a false oil level. The oil change may be performed by an authorized AQUANAMI dealer, repair shop, or person of your own choosing.

  • Page 76: Exhaust System

    WATERCRAFT AND MAIN COMPONENTS section. Engine Drive Shaft Seal Inspect and replace engine drive shaft seal according to Maintenance Chart. Replacing seal may be performed by an authorized AQUANAMI dealer or repair shop. Exhaust System Flushing Exhaust and Heat Exchanger Flushing the exhaust system with fresh water after each use is essential to neutralize corroding effects of salt or other chemical products present in water.

  • Page 77: Cooling System

    CAUTION: Never flush a hot engine. Always start the engine before opening the water tap. Open water tap immediately after engine is started to prevent overheating. Never run engine without supplying water to the exhaust cooling system when watercraft is out of water. Never run engine longer than 1 minute.

  • Page 78: Fuel System

    The carburetor should be cleaned using carburetor cleaner according to Maintenance Chart or after watercraft capsizes. Carburetor cleaning should be performed by an authorized Aquanami dealer. Electric System Engine Start/Stop Button and Safety Lanyard Make sure that both switches operate properly. Start engine and stop it using each switch individually.
  • Page 79 Bilge Pump Automatic Sensor Switch Make sure the bilge pump automatic sensor switch operates properly. Test the automatic sensor switch by adding clean water to bilge. Bilge pump should start to run when water level reaches about 2 inches. Bilge Pump and Manual Switch Make sure the bilge pump and manual switch operate properly.
  • Page 80 Battery Inspection Visually inspect battery casing for cracks, leaks or other possible damages. Discoloration, warping or raised top, indicates that the battery has overheated or been overcharged. If the casing is damaged, replace battery and thoroughly clean battery tray and surrounding area with a water and baking soda solution.
  • Page 81 AMBIENT TEMPERATURE CHARGING FREQUENCY Below 16°C (60°F) Every month Above 16°C (60°F) Every 2 weeks Charging a Battery NOTICE: If the battery becomes hot to the touch, stop charging and allow it to cool before continuing. NOTE: Sealed VRLA batteries have an internal safety valve. If battery pressure increases due to overcharging, the valve opens to release excess pressure, preventing battery damage.
  • Page 82 Battery Voltage Below 11.5 V: A battery with a voltage below 11.5 V requires a special procedure to recharge. In charging an over discharged battery, its internal resistance may be too high to charge at a normal charging rate. Set charger to the 10 A charging rate and monitor charging current for approximately 30 minutes.
  • Page 83 4. Install ignition coil. Refer to Ignition Coil Installation. Ignition Coil Replacing an ignition coil shall be performed by an authorized AQUANAMI dealer. Electric Fuse/Circuit Breaker If the electric bilge pump does not start, check the electric fuse/circuit breaker located inside electric control box.
  • Page 84 Steering System Check steering mechanism to ensure steering operates smoothly. There should be no excessive lash in the system. Refer to an authorized Aquanami dealer if necessary. Check and lubricate steering cable and rotating mechanism by an authorized AQUANAMI dealer according to the Maintenance Chart.
  • Page 85 mechanical systems. Inspect hull for cracks and any possible leaks. Check all seals in good conditions. Lift front end of watercraft to completely drain bilge through the bilge drain plug. Anticorrosion Treatment Wipe off any residual water in the engine compartment. Spray an anti-corrosion lubricant to metallic components in engine compartment while minimizing Overspray for corrosion protection.

  • Page 86: Watercraft Care

    WATERCRAFT CARE Post – Operation Care General Care Take the watercraft out of the water every day to prevent marine organism growth. Should any water be present in the bilge, open the drain plugs and tilt the watercraft rearward in order to allow water to flow out. Remember to always close the drain plugs before placing the unit in water.
  • Page 87 Heat Exchanger and Exhaust Cooling System Flushing Flushing the heat exchanger and exhaust cooling system with fresh water is essential to neutralize corroding effects of salt or other chemical products present in water. Flushing should be performed when the watercraft is not expected to be used further the same day or when the watercraft is stowed for any extended time.
  • Page 88 8. The user should not start water flow into flush water connector until the engine is started; adding that running water into the flush system without the engine first running will result in engine damage that will not be covered under warranty. Anticorrosion Treatment To prevent corrosion, spray a corrosion inhibitor (salt water resistant) over metallic components in engine compartment.

  • Page 89: Storage

    STORAGE It is recommended that the watercraft be serviced by an authorized AQUANAMI dealer, repair shop, or person of your own choosing, however the following operations can be performed by you with a minimum of tools. NOTE: Carry out the following tasks in the same order as detailed in this section.

  • Page 90: Fuel System

    Heat Exchanger and Exhaust System Flushing Perform procedure as described in MAINTENANCE PROCEDURES. Engine Oil and Filter Replacement The oil change and filter replacement may be performed by an authorized AQUANAMI dealer, repair shop, or person of your own choosing. Engine Internal Lubrication 1.

  • Page 91: Electric System

    4. Apply a small amount of anti-seize lubricant on spark plug threads, then reinstall the spark plug in the engine cylinder head. Refer to MAINTENANCE PROCEDURES. 5. Install the ignition coils, and refer to MAINTENANCE PROCEDURES. Engine Coolant Antifreeze should be replaced every 100 hours or every year to prevent antifreeze deterioration.

  • Page 92: Repairs

    NOTICE: The watercraft should never be left in water for storage. Never leave the watercraft stored in direct sunlight. Never store watercraft in a plastic bag. Repairs If any repairs are needed to body or to the hull, contact your authorized AQUANAMI dealer. - 90 -...

  • Page 93: Pre-Season Preparation

    AQUANAMI dealer. Use the following chart for preseason preparation. Since technical skills and special tools are required, some operations should be performed by an authorized AQUANAMI dealer. - 91 -...
  • Page 94 Preseason Preparation Chart Inspection of hull and seals. Operator GENERAL Lubrication/corrosion protection. Exhaust system condition and fasteners. Dealer ENGINE Condition of seals and fasteners. Dealer Oil level and oil filter. Dealer Inspection of heat exchangers, coolant level, hoses and components. If antifreeze was not COOLING SYSTEM Dealer changed for storage, drain and replace with...

  • Page 95: Technical Information

    TECHNICAL INFORMATION - 93 -...

  • Page 96: Watercraft Identification

    WATERCRAFT IDENTIFICATION The main components of the watercraft (engine and hull) are identified by different serial numbers. It may sometimes become necessary to locate these numbers for warranty purposes or to trace the watercraft in the event of theft. Hull Identification Number The Hull Identification Number (HIN) is engraved on the right hand side of the hull at the rear of watercraft.

  • Page 97: Engine Identification Number

    Engine Identification Number The Engine Identification Number (EIN) is located on the cylinder head under the air induct manifold. - 95 -...

  • Page 98: Engine Emissions Information

    EPA Emission Regulations All Aquanami watercrafts are certified to the EPA as conforming to the requirements of the regulations for the control of air pollution from new watercraft engines. - 96 -...

  • Page 99: Emission Control Information

    The factory procedure for servicing the product must be strictly followed and, whenever practicable, returned to the original intent of the design. The responsibilities listed above are general and in no way a complete listing of the rules and regulations pertaining to the EPA requirements on exhaust emissions for marine products.

  • Page 100: Specification

    SPECIFICATION 2016 MODEL JETANGLER SPECIFICATION CAPACITY Max Number of People (with passenger seat): Recommended Max Load: 160 kg 350 lbs DIMENSIONS, WEIGHT AND RECOMMENDED MAXIMUM LOADS Length 360 cm 141.7 in Width 96 cm 37.8 in Height 41 cm 16.1 in...
  • Page 101 [1]. Declared power as per ISO 8665 at propeller-shaft. [2]. Maximum speed varies depending on weight, wind and current conditions. Note: Aquanami reserves the right to make changes in design and specifications and/or to make additions to, or improvements in its products without imposing any obligation upon itself to install them on its products previously manufactured.

  • Page 102: Troubleshooting

    TROUBLESHOOTING - 100 -...

  • Page 103: Troubleshooting Guidelines

    You may solve some of the problems rather quickly, but may need help from a skilled mechanical technician. In such cases, refer to an authorized Aquanami Dealer for servicing. If a procedure for replacement or repair is not described in the Guide, have an Authorized Aquanami Dealer perform necessary service.
  • Page 104 Engine runs fouled or defective spark plug replace irregularly or stalls electric wire loose connection or tighten, or see a Aquanami dealer. bad connectors defective electric control box refer to a Aquanami dealer fouled or weak spark plug replace...
  • Page 105 Abnormal vibration between engine output shaft and refer to a Aquanami dealer jet drive shaft engine compartment cover not install cover properly properly closed bad seal...

  • Page 106: Warranty

    WARRANTY - 104 -...

  • Page 107: Aquanami Limited Warranty

    (2) the AQUANAMI watercraft has been altered or modified in such a way so as to adversely affect its operation, performance or durability, or has been altered or modified to change its intended use.
  • Page 108 Operator’s Guide; – Damage resulting from removal of parts, improper repairs, service, maintenance, modifications or use of parts not manufactured or approved by AQUANAMI or resulting from repairs done by a person that is not an authorized servicing AQUANAMI dealer;...
  • Page 109 This limited warranty coverage is available only if each of the following conditions has been fulfilled: – The 2015 AQUANAMI watercraft must be purchased as new and unused by its first owner from an AQUANAMI dealer authorized to distribute AQUANAMI watercraft in the country in which the sale occurred;...
  • Page 110 No claim of breach of warranty shall be the cause for cancellation or rescission of the sale of the AQUANAMI watercraft to the owner. In the event that service is required outside of the country of original sale, the owner...

  • Page 111: Us Epa Emission-Related Warranty

    AQUANAMI engine/equipment to its proper configuration as soon as possible. 3. Any action or inaction by the operator unrelated to the warranty claim. 4. Maintenance that was performed more frequently than AQUANAMI specifies. 5. Anything that is fault or responsibility.
  • Page 112 – Crankcase ventilation valve Limited Applicability As a certifying manufacturer, AQUANAMI may deny emission-related warranty claims for failures that have been caused by the owner’s or operator’s improper maintenance or use, by accidents for which the manufacturer has no responsibility, or by acts of God. For example, an emission-related warranty claim need not be honored for failures that have been directly caused by the operator’s abuse of the engine/equipment or the operator’s use of the engine/equipment...

  • Page 113: Customer Information

    CUSTOMER INFORMATION - 111 -...
  • Page 114 _________________________________________________________________ STREET _________________________________________________________________ CITY STATE / PROVINCE ZIP/POSTAL CODE _________________________________________________________________ COUNTRY Purchase Date____________I__________I__________I__________I______________ YEAR MONTH Warranty Expiry Date______I__________I__________I__________I______________ YEAR MONTH To be completed by the authorized Aquanami dealer at the time of the sale. DEALER IMPRINT AREA - 112 -...

Table of Contents