Page 2
Preface Notice The company reserves the right to revise this publication or to change its contents without notice. Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent vendor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication.
Preface FCC Statement (Federal Communications Commission) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IMPORTANT SAFETY INSTRUCTIONS Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock, and injury to persons when using any electrical equipment: Do not use this product near water, for example near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
Preface Instructions for Care and Operation The computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions: Don’t drop it, or expose it to shock. If the computer falls, the case and the components could be damaged. Keep it dry, and don’t overheat it.
Power Safety The computer has specific power requirements: • When you want to unplug the power cord, be sure to disconnect it by the plug head, not by its wire. • Make sure the socket and any extension cord(s) you use can support the total current load of all the connected devices.
Preface Cleaning Do not apply cleaner directly to the computer, use a soft clean cloth. Do not use volatile (petroleum distillates) or abrasive cleaners on any part of the computer. Servicing Do not attempt to service the computer yourself. Doing so may violate your warranty and expose you and the computer to electric shock.
Ergonomics We designed your Multimedia PC system to be functional as well as attractive. To get most out of it, here are some suggestions on how to position and use the computer: • The top third of the LCD (screen) should be at eye-level or slightly below. •...
Notice ...I FCC Statement ...II Instructions for Care and Operation ... IV Power Safety ... V Cleaning ... VI Servicing ... VI Ergonomics ...VII Quick Start Guide Overview ...1-1 Model Differences ...1-2 Advanced Users ...1-4 Beginners and Not-So-Advanced Users ...1-4 Warning Boxes ...1-4 Not Included ...1-5 System Software ...1-6...
Page 11
Preface Parallel Printer ...2-11 Power Management Overview ...3-1 Turning on the Computer ...3-2 Power Plans ...3-3 System Power Options ...3-5 Hibernate vs. Shut Down ...3-5 Sleep vs. Hibernate ...3-5 Sleep ...3-6 Hibernate ...3-6 Configuring the Power Button ...3-7 Drivers & Utilities RAID &...
Page 12
System Time & Date (Main Menu) ...5-6 Installed Memory/Available to OS/Used by devices (Main Menu) ...5-6 Advanced Menu ...5-7 Chipset Information Menu (Advanced Menu) ...5-7 Reset Configuration Data: (Advanced Menu) ...5-8 Legacy USB Support: (Advanced Menu) ...5-8 Boot-time Diagnostic Screen: (Advanced Menu) ...5-8 Energy Lake: (Advanced Menu) ...5-8 IGD Memory Size (Advanced Menu >...
Page 13
Preface Troubleshooting Overview ...8-1 Basic Hints and Tips ...8-2 Backup and General Maintenance ...8-3 Viruses ...8-4 Upgrading and Adding New Hardware/Software ...8-5 Problems and Solutions ...8-7 Interface (Ports & Jacks) Overview ... A-1 Ports and Jacks ... A-2 Card Reader Port ... A-2 DC-In Jack ...
Page 14
Scheme Options ... E-12 NVIDIA Video Driver Controls ... E-13 Video Driver Installation ... E-13 NVIDIA Video ... E-13 NVIDIA nView Desktop Manager ... E-15 Power Management ... E-16 Power Schemes ... E-17 System Power Options ... E-18 Hibernate Mode vs. Shutdown ... E-18 Standby Mode vs.
Page 15
Preface Intel WLAN Driver Installation ... E-29 802.11 b/g USB Wireless LAN Driver Installation ... E-30 Peer to Peer Network Setup ... E-31 Bluetooth Module ... E-33 Bluetooth Driver Installation ... E-33 Remote Control Unit ... E-35 Consumer Infrared Driver Installation ... E-35 Hybrid Mini-PCI TV Tuner Module ...
Chapter 1: Quick Start Guide Overview This Quick Start Guide is a brief introduction to the basic features of your computer, to navigating around the computer and to getting your system started. The remainder of the manual covers the following: •...
Quick Start Guide Model Differences This computer series includes two different model types based upon the size of LCD screen. The models are otherwise identical in appearance, ports and features etc. Both models feature EITHER integrated Intel video, OR an NVIDIA video card, depending on your purchase option.
Page 18
Quick Start Guide Feature Model A Model B 19.0" WXGA+ (1440 * 900) TFT 22.0" WSXGA+ (1680 * 1050) LCD Type 16:10 Wide Screen TFT 16:10 Wide Screen TFT NVIDIA GeForce Go 7600 Video (discrete video option)* Video Adapter Intel G965 Integrated Video (Integrated video option)* Design Table 1 - 1 - Model Differences *See...
Quick Start Guide Advanced Users If you are an advanced user you may skip over most of this Quick Start Guide. However you may find it useful to refer to “What to Install” on page 4 - “BIOS Utilities” on page 5 - 1 “Upgrading The Computer”...
Not Included Operating Systems (e.g. Windows Vista/Windows XP) and applications (e.g. word processing, spreadsheet and database programs) have their own manuals, so please consult the appropriate manuals. If you are installing new system software, or are re-configuring your computer for a different system, you will need to install the drivers listed in “Drivers &...
Quick Start Guide System Software Your computer may already come with system software pre-installed. Where this is not the case, or where you are re-configuring your computer for a different system, TV Tuner Module you will find the following operating systems are supported. Support Note that the TV Tuner module (factory) options...
System Startup Remove all packing materials, CDs/DVDs and floppy disks etc. Securely attach any peripherals you want to use with the computer to their ports. Attach the AC/DC adapter to the DC-In jack at the rear of the computer, then plug the AC power cord into an outlet, and connect the AC power cord to the AC/DC adapter.
Quick Start Guide System Map: Front View & Top View (Model A) Optional Built-In PC Camera Power LED Consumer Infrared Transceiver (Communicates with Optional TV Remote) LED Indicators Speakers Power Button Brightness Hot Key Button* Application Hot Key Button* *Requires Hot Key Driver 1 - 8 System Map: Front View &...
System Map: Front View & Top View (Model B) Optional Built-In PC Camera Power LED Consumer Infrared Transceiver (Communicates with Optional TV Remote) LED Indicators Speakers Power Button Brightness Hot Key Button* Application Hot Key Button* *Requires Hot Key Driver Figure 1 - 3 - Front View (Model B) System Map: Front View &...
Quick Start Guide Tilting the LCD Screen It is possible to adjust the angle of the LCD screen in order to get the best possible view without glare etc. Make sure the computer is sitting on a flat even surface. Grip the computer at the top of the screen with one hand, and use the other hand to pull the stand out until you hear a click (at about 40 degrees).
Quick Start Guide Moving the Computer We strongly recommend using both hands to move the computer. You can use one hand to grip the computer by the stand, and the other to hold the top of the LCD screen. The computer may be transported in the upside down position by using the stand as a handle, but using both hands to carry it.
Quick Start Guide LED Indicators The LED indicators on the computer display helpful information about the current status of the computer. Icon Color Green Blinking Green Orange Green Green Orange Green/Orange 1 - 12 LED Indicators Table 1 - 3 - LED Indicators Description The computer is On The computer is in Sleep...
System Map: Right View CD Emergency Eject If you need to manually eject a CD/DVD (e.g. due to an unexpected power interruption) push the end of a straight- ened paper clip into the emergency eject hole. Do not use a sharpened pen- cil or similar object that may break and become lodged in the hole.
Quick Start Guide System Map: Left View Figure 1 - 6 - Left View ExpressCard Slot 54/34 7-in-1 Card Reader 1 * USB 2.0 Port Mini-IEEE 1394 Port Line-In Jack (Blue) Microphone-In Jack (Pink) Headphone-Out Jack (Green) S/PDIF-Out Jack (Black) Vent/Fan Intake/Outlet 10.
System Map: Rear View Camera Angle Switch USB Port Cover (see pages Module Cover Rear Component Cover 3 * USB 2.0 Ports 1 External SATA Port DC-In Jack Audio/Video Jacks (See over) RJ-11 Phone Jack 10. RJ-45 LAN Jack 11. Stand 12.
Quick Start Guide Audio/Video Jacks CATV Cable Safety Make sure that your CATV sys- tem installer has connected the coaxial cable shield to the grounding system of the building, as close to the point of cable en- try as practical. 1 - 16 Audio/Video Jacks Figure 1 - 8 - Audio/Video Jacks Port/Jack...
Most of the control panels, utilities and programs within Windows Vista (and most other Windows versions) are accessed from the Start menu. When you install programs and utilities they will be installed on your hard disk drive, and a shortcut will usually be placed in the Start menu and/or the desktop. Right-click the Start menu icon , and then select Properties if you want to customize the appearance of the Start menu.
For NVIDIA GeForce Go Click GeForce Go... (tab). Click Start the NVIDIA Control Panel The NVIDIA Control Panel can also be accessed by right-clicking the desktop, and then clicking NVIDIA Control Panel. 1 - 18 Video Features “Video Adapter Options” on page D - “Intel Video Driver Controls”...
Page 34
Quick Start Guide Figure 1 - 10 - Display Settings Video Features 1 - 19...
Quick Start Guide Power Options The Power Options (Hardware and Sound menu) control panel icon in Windows (see page 17) allows you to configure power management features for your computer. You can conserve power by means of power plans and configure the options for the power button, sleep button, display and sleep mode from the left menu. Note that the Power saver plan may have an affect on computer performance.
Features & Components Chapter 2: Features & Components Overview Read this chapter to learn more about the following main features and components of the computer: • Hard Disk Drive • Optical (CD/DVD) Device • 7-in-1 Card Reader • ExpressCard Slot •...
Features & Components Hard Disk Drive The hard disk drive(s) is(are) used to store your data in the computer. The hard Power Safety disk(s) can be taken out to accommodate other 3.5" serial (SATA) hard disk drives with a height of 26mm(h). If you have included the 2nd RAID SATA HDD option Before attempting to ac- cess any of the internal components...
Optical (CD/DVD) Device There is a bay for a 5.25" optical (CD/DVD) device (12.7mm height). The actual de- vice will depend on the module you purchased (see optical device is usually labeled “Drive D:” and may be used as a boot device if properly set in the BIOS (see “Boot Menu”...
Features & Components Handling CDs or DVDs Proper handling of your CDs/DVDs will prevent them from being damaged. Please follow the advice below to make sure that the data stored on your CDs/DVDs can be CD Emergency Eject accessed. If you need to manually eject a CD (e.g.
DVD Regional Codes To change the DVD regional codes see page 1 - DVD Regional Coding Region Geographical Location USA, Canada Western Europe, Japan, South Africa, Middle East & Egypt South-East Asia, Taiwan, South Korea, The Philippines, Indonesia, Hong Kong South &...
Features & Components 7-in-1 Card Reader The card reader allows you to use some of the latest digital storage cards. Push the Card Reader Cover card into the slot and it will appear as a removable device, and can be accessed in the same way as your hard disk (s).
ExpressCard Slot The computer is equipped with an ExpressCard/34/54 slot that reads Express Card/ 34 and ExpressCard/54 formats. ExpressCards are the successors to PCMCIA (PC Cards). ExpressCard/54 is used for applications which require a larger interface slot, e.g. CompactFlash card reader. The number denotes the card width; 54mm for the Ex- press Card/54 and 34mm for the ExpressCard/34.
Features & Components Audio Features You can configure the audio options on your computer from the Sound Sound Volume panel in Windows, or from the Realtek HD Audio Manager Adjustment control panel (right-click the taskbar icon The sound volume level is set using the volume control within Windows (and the volume func-...
Hot Key Buttons The hot key buttons on the top of the computer allow you to alter the brightness of the screen, and give instant access to a user-defined application, with one quick but- ton press. After installing the driver (see page ble-click the icon to bring up the configuration menu to define which application to open when the application hot key button...
(.exe) file, not just the shortcut. To find the application right- click its shortcut on the desktop and click Prop- erties. Click the short- cut (tab) and see where the executable file is lo- cated by clicking the...
Adding a Printer The most commonly used peripheral is a printer. The following conventions will help you to add a printer, however it is always best to refer to the printer manual for specific instructions and configuration options. USB Printer Most current printers have a USB interface connection.
Power Management Chapter 3: Power Management Overview To conserve power, your computer’s power management conserves power by con- trolling individual components of the computer (the monitor and hard disk drive) or the whole system. This chapter covers: • Turning on the Computer •...
Power Management Turning on the Computer To the computer on simply press the power button on the top of the computer. Shut Down When the computer is on, you can use the power button as a Sleep/Hibernate hot- Note that you should al- key button when it is pressed for less than 4 seconds (pressing and holding the power ways shut your comput- button for longer than this will shut the computer down).
Power Plans The computer can be configured to conserve power by means of power plans. You can use (or modify) an existing power plan, or create a new one. The settings may be adjusted to set the display to turn off after a specified time, and to send the computer into Sleep after a period of inactivity.
Page 51
Power Management Each Windows power plan will also adjust the processor performance of your ma- chine in order to save power. This is worth bearing in mind if you are experiencing any reduced performance. Figure 3 - 2 Power Plans 3 - 4 Power Plans...
Their main difference is: When you come back from hibernation, you can return to where you last left off (what was on your desktop) without reopening the application(s) and file(s) you last used.
Power Management Sleep Sleep uses very little system power, and takes a short time to return to full operation. After an extended period of time in Sleep the computer will save the contents of sys- tem memory (e.g. any open documents and applications) to the hard disk and shut the system down.
Configuring the Power Button The power button may be set to send the computer in to either Sleep or Hibernate. In Sleep, the LED will blink green. In Hibernate the LED will be orange. If the only the display is turned off, the LED will remain green. Power Management Password Protection...
Chapter 4: Drivers & Utilities This chapter deals with installing the drivers and utili- ties essential to the operation or improvement of some of the computer’s subsystems. The system takes ad- vantage of some newer hardware components for which the latest versions of most available operating systems haven’t built in drivers and utilities.
Windows Vista Driver Chipset (Included in Windows Vista OS) Intel Video NVIDIA Video Audio Modem (Included in Windows Vista OS) Card Reader JMicron Hot Key (for Brightness and Application Hot Keys) Intel Matrix (for RAID/AHCI) Wireless LAN Modules Bluetooth Module Remote Control Unit (for Remote Control Unit) Hybrid Mini-PCI TV Tuner Module...
Drivers & Utilities Manual Driver Installation If you wish to install the drivers manually, click the Exit button to quit the Drivers Installer application, and then browse to the executable file in the location listed in the table below and follow the installation procedure for each driver.
User Account Control (Win Vista) If a User Account Control prompt appears as part of the driver installation procedure, click Continue or Allow, and follow the installation procedure as direct- Windows Security Message If you receive a Windows security message as part of the driver installation process.
Drivers & Utilities Modem 1. Click 4.Install Modem Driver > Yes. 2. Click OK. 3. The modem is ready for dial-up configuration. Modem Country Selection Be sure to check if the modem country selection is ap- propriate for you (Control Panel > Phone and Modem Options).
Module Drivers See the pages indicated for the driver installation pro- cedures for any optional modules included in your pur- chase option. RAID & AHCI See the setup procedure for your RAID module in “Setting Up SATA RAID or AHCI Modes” on page 7 2, and driver installation procedure in on page 7 - Wireless LAN...
Chapter 5: BIOS Utilities Overview This chapter gives a brief introduction to the computer’s built-in software: Diagnostics: The POST (Power-On Self Test) Configuration: The Setup utility If your computer has never been set up, or you are making important changes to the system (e.g.
BIOS Utilities The Power-On Self Test (POST) Each time you turn on the computer, the system takes a few seconds to conduct a POST, including a quick test of the on-board RAM (memory). As the POST proceeds, the computer will tell you if there is anything wrong. If there is a problem that prevents the system from booting, it will display a system summary and prompt you to run Setup.
BIOS Utilities Non-Fatal Errors This kind of error still allows you to boot. You will get a message identifying the problem (make a note of this message!) followed by the prompt: • Press <F1> to resume • <F2> to enter Setup Press F1 to see if the boot process can continue.
BIOS Utilities The Setup Program The Phoenix Setup program tells the system how to configure itself and manage ba- sic features and subsystems (e.g. port configuration). Entering Setup To enter Setup, turn on the computer and press F2 during the POST. The prompt (Press F2 to Enter Setup) is usually present for a few seconds after you turn on the system.
Setup Screens The following pages contain additional advice on portions of the Setup. Along the top of the screen is a menu bar with five (5) menu headings. When you select a heading, a new screen appears. Scroll through the features listed on each screen to make changes to Setup.
BIOS Utilities Main Menu Figure 5 - 1 Main Menu System Time & Date (Main Menu) The hour setting uses the 24-hour system (i.e., ØØ = midnight; 13 = 1 pm). If you can change the date and time settings in your operating system, you will also change these settings.
Advanced Menu Phoenix cME FirstBIOS Pro Setup Utility Main Advanced Advanced Security Setup Warning Setting itmes on this menu to incorrect values may cause your system to malfunction. Chipset Information Menu Reset Configuration Data: Legacy USB Support: Boot-time Diagnostic Screen: Energy Lake: IGD - Memory Size: SATA RAID Enable:...
BIOS Utilities Reset Configuration Data: (Advanced Menu) This item is set to No as default. You can change the setting to Yes if you have in- stalled a new add-on which has reconfigured the system, resulting in such a serious system conflict that the operating system is unable to boot.
IGD Memory Size (Advanced Menu > Advanced Chipset Control) Press Enter here to select the amount of pre-allocated graphics memory for the in- tegrated graphics device (Intel Video option only). The default setting is 256MB. SATA RAID Enable: (Advanced Menu) This menu item allows you to enable/disable SATA RAID for your hard disks.
BIOS Utilities Security Menu Figure 5 - 3 Security Menu Security Menu The changes you make here affect the access to the Setup utility itself, and also access to your machine as it boots up after you turn it on. Set Supervisor Password (Security Menu) These settings do not You can set a password for access to the Setup utility.
Fixed disk boot sector: (Security Menu) Choose Write Protect to protect the area of the hard disk containing information on how to start up the computer from having information written to it. This helps pre- vent viruses from affecting this area, however, it is not a substitute for proper virus protection supplied by updated anti-virus software, merely an extra safeguard (see “Viruses”...
BIOS Utilities Boot Menu Figure 5 - 4 Boot Menu When you turn the computer on it will look for an operating system (e.g. Win- dowsXP) from the devices listed in this menu, and in this priority order. If it cannot find the operating system on that device, it will try to load it from the next device in the order specified in the Boot priority order.
Exit Menu PhoenixBIOS Setup Utility Main Advanced Security Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes Help Select Item Exit Select Menu Choosing to Discard Changes, or Exit Discarding Changes, will wipe out any changes you have made to the Setup. You can also choose to restore the original Set- up defaults that will return the Setup to its original state, and erase any previous changes you have made in a previous session.
Chapter 6: Upgrading The Computer Overview This chapter contains information on upgrading the computer. Follow the steps out- lined to make the desired upgrades. If you have any trouble or problems you can con- tact your service representative for further help. Before you begin you will need: •...
Upgrading The Computer When Not to Upgrade These procedures involve opening the system’s case, adding and sometimes replac- ing parts. Power Safety Warning You should not perform any of these upgrades if: Before you undertake upgrade proce- • Your system is still under warranty or a service contract dures, make sure that •...
Upgrading the Hard Disk Drive(s) The hard disk drive(s) can be taken out to accommodate other 3.5" serial (SATA) hard disk drives with a height of 26mm (h) (see Turn the computer off and disconnect all peripherals and cables (including tele- phone lines).
Page 81
Upgrading The Computer Figure 6 - 2 HDD Cover Removal & Screws 6 - 4 Upgrading the Hard Disk Drive(s) Remove the hard disk cover(s) Remove the hard disk screws from the hard disk(s) you want to replace...
Page 82
Carefully disconnect cable(s) Remove the hard disk screws Reverse the process to install any new hard disk. 10. If you are configuring the hard disks in AHCI mode or as a RAID system see “Setting Up SATA RAID or AHCI Modes” on page 7 - from the hard disk(s) you want to replace , and brackets &...
Upgrading The Computer Upgrading the System Memory (RAM) The computer has two memory sockets for 200 pin Small Outline Dual In-line (SO- DIMM) DDRII (DDR2) 533/667 type memory modules (see Figure 6 - 4 Component Cover Screws 6 - 6 Upgrading the System Memory (RAM) for details of supported module types).
Page 84
Carefully (a fan and cable are attached to the under side of the cover) slide the component cover in the direction of arrow unlock symbol. Carefully disconnect the fan cable Remove the component cover , until the arrow aligns with the from point on the mainboard.
Page 85
Upgrading The Computer Figure 6 - 6 RAM Module Release 10. Insert a new module holding it at about a 30° angle and fit the connectors firmly 11. The module’s pin alignment will allow it to only fit one way. Make sure the module 12.
Page 86
13. Replace the component cover (don’t forget to reconnect the fan cable) and the screws. 14. Restart the computer to allow the BIOS to register the new memory configuration as it starts up. Upgrading The Computer Contact Warning Be careful not to touch the metal pins on the module’s edge.
Upgrading The Computer Upgrading the Processor If you want to upgrade your computer by replacing the existing processor with a fast- Warranty er/new one you will need to contact your customer service representative. We rec- ommend that you do not do this yourself, since if it is done incorrectly you may The CPU is not a user damage the processor or mainboard.
Modules Chapter 7: Modules Overview This chapter contains the information on the various modules (some of which are optional) which may come with your computer, depending on the configuration purchased. If you are unsure please contact your service representative. The chapter includes information on the following: •...
Modules Setting Up SATA RAID or AHCI Modes RAID If your purchase includes the RAID (Redundant Array of Independent Disks) option, the following pages provide an introduction to configuring your hard disks in RAID mode. A RAID requires two hard disks, and you may use your hard disks in combi- nation with Striping (RAID 0) or Mirroring (RAID 1) for either fault tolerance or performance.
Page 90
Prepare the following before setting up your Serial ATA hard disks in RAID or AHCI mode: The Microsoft Windows Vista OS CD. The second hard disk (required for RAID but not required for AHCI) installed in the optional device drive bay (see page SATA RAID or AHCI Setup Procedure (BIOS) Start-up your computer and press <F2>...
Page 91
Modules For RAID Only (for AHCI Mode go to Array Types Mirrored Array (RAID 1) provides full data protection, data can simply be copied from a healthy disk to a replacement for any failed disk. Striped Array (RAID 0) is NOT fault- tolerant.
Page 92
Confirm the selection by pressing Y. 10. This will now return to the main menu. Intel(R) Matrix Storage Manager option ROM v6.0.0.1022 ICH8R wRAID5 Copyright (C) 2003-06 Intel Corporation. All Rights Reserved. [ DISK/VOLUME INFORMATION ] RAID Volumes: Name Level My RAID RAID0(Stripe) Physical Disks:...
Modules Intel Matrix 1. Make sure the module is powered on, and then insert the Device Drivers & 2. Click Optional. 3. Click 1.Install Intel Matrix > Yes. 4. Click Next > Next > Yes > Next. 5. Click Finish to restart the computer 6.
Modules Wireless LAN Modules If you have included either an Intel PRO/Wireless 3945ABG (802.11a/b/g) PCIe WLAN module, or 802.11b/g USB WLAN module, in your purchase option the LED will be green. Install the driver as indicated below. WLAN Driver Installation 1.
Modules Connecting to a Wireless Network Figure 7 - 4 Taskbar Menus Network and Sharing Center You can also use the Network and Sharing Center control panel in Windows (Network and Internet) to connect to any available wireless networks. Figure 7 - 5 Connect to a Network 7 - 8 Wireless LAN Modules...
Page 96
Click a network, and then click Connect. If you do not see a network you want to connect to, click Set up a connection or network (a list of options will appear allowing manual searching, and creating a new network). Move the cursor over the taskbar icon to see the connection status (see below).
Page 97
Modules Security Enabled Networks You should try to make sure that any network you are connecting to is a se- cure network. Connecting to unsecure net- works may allow unautho- rized access your computer, documents, web- sites and files etc. Figure 7 - 8 Disconnecting 7 - 10 Wireless LAN Modules...
9. You can configure the settings at any time by going to the IVT Corpora- tion BlueSoleil - Main Window (Start > Programs/All Programs > IVT BlueSoleil > BlueSoleil), or by clicking the desktop icon LED will will appear on the desktop.
Page 99
Modules User Guides & Help View BlueSoleil User Guides from the Help Menu (or press the F1 key) in the IVT Cor- poration BlueSoleil - Main Window control panel. Click the Help menu select Contents and Index. Look through Getting Started or select the ap- propriate User Guide from...
Modules Remote Control Unit If your purchase includes the optional TV Tuner module you will be provided with a remote control unit. You need to install the consumer infrared driver to enable all the remote control unit functions. The remote control unit allows to remotely start and shutdown the system, to run Windows Media Center and navigate the Media Center menus etc.
Page 101
Modules Sleep Button The Sleep Button in the Start Menu (not available Classic View) can be used to send the computer into Sleep. Note that Sleep is the default power saving state in Windows Vista. You can configure the sleep button action (when I press the sleep...
Hybrid Mini-PCI TV Tuner Module A CD containing drivers, software and a user guide will be supplied if your purchase configuration includes the optional Hybrid (Analog & Digital) Mini-PCI TV Tuner module. The optional TV Tuner allows you to watch TV, play music CDs, video conference and capture still images and video on your PC.
Modules MPC788/MPC718 Driver & Software 1. Insert the driver MPC788 or MPC718 CD-ROM into the CD/DVD drive. 2. Follow the on screen instructions to install the driver software. TV Antenna 3. The TV Tuner is fully supported by Windows Media Center in Windows The TV antenna sup- plied with any TV Tuner 4.
Modules Digital TV Broadcast Signal The antenna is the most crucial factor in receiving a clear digital terrestrial TV broadcast signal. The passive antenna provided should provide a clear signal when placed beside a window. If the signal is not clear then you can purchase an active antenna (it should also be placed beside a window) to improve the signal.
Modules PC Camera Module If you have included a PC Camera module in your purchase option, install the driver as indicated below. PC Camera Driver Installation 1. Make sure the module is powered on, and then insert the Device Drivers & 2.
PC Camera Audio Setup If you wish to capture video & audio with your camera, it is necessary to setup the audio recording options in Windows (see Go to the Start menu and point to Settings (or just click Control Panel) and click Control Panel, then double-click the Sounds &...
Page 107
Modules Figure 7 - 12 Audio Setup for PC Camera Right-click 7 - 20 PC Camera Module...
BisonCam BisonCam is a video viewer useful for general purpose video viewing and testing, and can capture video files to .avi format. Run the BisonCam program from the Start > Programs/All Programs > Bison- Cam menu (it is recommended that you set the capture file before the capture process - see Set Capture File below).
Modules Eliminating Screen Flicker If you find that the video screen in the BisonCam program is flickering, you can try to adjust the setting in the Video Capture Filter options. Figure 7 - 13 Video Capture Filter 7 - 22 PC Camera Module Run the BisonCam program.
Wireless Keyboard & Mouse Kit If you have included the RF wireless keyboard and mouse kit in your purchase op- tion, a quick installation guide is provided to guide you through setting up the sys- tem. However, first setup the hardware as per the instructions overleaf. Wireless Keyboard &...
Modules Wireless Kit Hardware Setup Figure 7 - 15 Inserting the USB Receiver Dongle 7 - 24 Wireless Keyboard & Mouse Kit Turn the computer off and disconnect all peripherals and cables (including tele- phone lines). Place the computer on a flat stable surface, preferably on a protective covering to avoid damage to the LCD screen.
Page 112
Make sure all the appropriate batteries are correctly inserted into the mouse and keyboard. Make sure the mouse is powered on (the power switch is on the base of the mouse). Follow the instructions in the Quick Installation Guide to conduct the ID Pairing Procedure.
Modules Wireless Kit Driver 1. Make sure the module is powered on, and then insert the Device Drivers & Utilities + User’s Manual CD-ROM into the CD/DVD drive. 2. Click Optional. 3. Click 6.Install WKit Driver > Yes. 4. Click the button to install the driver. 5.
Troubleshooting Chapter 8: Troubleshooting Overview Should you have any problems with your computer, before consulting your service representative, you may want to try to solve the problem yourself. This chapter lists some common problems and their possible solutions. This can’t anticipate every problem, but you should check here before you panic. If you don’t find the answer in these pages, make sure you have followed the instructions carefully and observed the safety precautions in the preface.
Troubleshooting Basic Hints and Tips Many of the following may seem obvious but they are often the solution to a problem when your computer ap- pears not to be working. • Power - Is the computer actually plugged into a working electrical outlet? If plugged into a power strip, make sure it is actually working.
Backup and General Maintenance • Always backup your important data, and keep copies of your OS and programs safe, but close to hand. Don’t forget to note the serial numbers if you are storing them out of their original cases, e.g. in a CD wal- let.
Troubleshooting Viruses • Install an Anti-Virus program and keep the definitions file (the file which tells your program which viruses to look for) up to date. New computer viruses are discovered daily, and some of them may seriously harm your computer and cause you to lose data. Anti-Virus programs are commercially available and the defini- tions file updates are usually downloadable directly from the internet.
Upgrading and Adding New Hardware/Software • Do not be tempted to make changes to your Windows Registry unless you are very sure of what you are doing, otherwise you will risk severely damaging your system. • Don’t open your computer or undertake any repair or upgrade work if you are not comfortable with what you are doing.
Page 119
Troubleshooting • Thoroughly check any recent changes you made to your system as these changes may affect one or more system components, or software programs. If possible, go back and undo the change you just made and see if the problem still occurs. •...
Problems and Solutions Problem The computer feels too Make sure the computer is properly ventilated and the Vent/Fan intakes are not blocked. If this hot. doesn’t cool it down, put the system into Hibernate mode or turn it off for an hour. Make sure the computer isn’t sitting on a thermal surface (see you’re using the correct adapter.
Page 121
Troubleshooting Problem The sound cannot be The volume might be set too low. Check the volume control in the Volume Control Panel in the heard or the volume is Windows taskbar (see very low. adjust. The compact disc cannot The compact disc is dirty. Clean it with a CD-ROM cleaner kit. be read.
Interface (Ports & Jacks) Appendix A: Interface (Ports & Jacks) Overview The following chapter will give a quick description of the interface (ports & jacks) which allow your computer to communicate with external devices, connect to the internet etc. Interface (Ports & Jacks) A - 1...
Interface (Ports & Jacks) Ports and Jacks Item Card Reader Port The card reader allows you to use some of the latest digital storage cards. Push the card into the slot and it will appear as a removable device. DC-In Jack Plug the supplied AC/DC adapter into this jack to power your computer.
Interface (Ports & Jacks) Item Description RJ-11 Phone Jack This port connects to the built-in modem. You may plug the telephone line directly into this RJ-11 telephone connection. Note: Broadband (e.g. ADSL) modems usually connect to the LAN port. Mini-IEEE 1394 Port This port allows a high-speed connection to various peripheral devices, e.g.
Interface (Ports & Jacks) Item Description USB 2.0/1.1 Ports These USB 2.0 compatible ports (USB 2.0 is fully USB 1.1 compliant) are for low-speed peripherals such as keyboards, mice or scanners, and for high-speed peripherals such as external HDDs, digital video cameras or high-speed scanners etc. Devices can be plugged into the computer, and unplugged from the computer, without the need to turn the system off (if the power rating of your USB device is 500mA or above, make sure you use the power supply which comes with the device).
Audio/Video Jacks Port/Jack S-Video-In Jack Right & Left Audio-In Jacks Composite Video-In Jack CATV-In (Coaxial) Jacks (for TV Tuner Option Only) Figure A - 2 - Audio/Video Jack Connections Figure A - 1 - Audio/Video Jacks Connection Connect an S-Video Cable to this Jack to Display External Video Sources on the LCD Connect Analog Audio Cables to Play External Audio Sources Through the Computer’s...
Appendix B: Intel Video Driver Controls The basic settings for configuring the LCD are outlined in page 1 - Video Driver Installation To access the Intel Graphics Media Accelerator Driver Controls you must install the video driver as indicated below). Make sure you install all the drivers in the order indicated in Table 4 - 1, on page 4 - Intel Video...
Intel Video Driver Controls Taskbar Icon The Intel GMA control panel can also be ac- cessed by clicking the icon in the taskbar and selecting Graphics Properties from menu. If you cannot see the tray icon click the “Show Tray Icon” tickbox in the Intel(R) Graphics Me- dia Accelerator Driver tab.
Page 130
You may make changes to the color, schemes, Hot Keys etc. by clicking the appro- priate menu item or button. Click Information (button) to obtain useful information about the graphics properties of the computer, and see the Support tab in Informa- tion to get weblinks to the latest information on the Intel Website.
(.exe) file, not just the shortcut. To find the application right- click its shortcut on the desktop click Proper- ties. Click the Shortcut (tab) and see where the executable file is located by clicking the Open File Location (button).
NVIDIA Video Driver Controls Appendix C: NVIDIA Video Driver Controls The basic settings for configuring the LCD are outlined in “Video Features” on page 1 - Video Driver Installation To access the NVIDIA GeForce Go controls you must install the video driver as indicated below.
Panel To access the Ge- Force control panel from the desk- top; right-click desktop, then click NVIDIA Control Pan- Figure C - 1 NVIDIA GeForce Go Control Panel C - 2 NVIDIA Video Driver Controls NVIDIA Control Panel More advanced video configuration options are provided in the NVIDIA Control Panel tab.
Page 134
The NVIDIA Control Panel allows quick access to features such as 3D Settings and Help menus etc. NVIDIA Video Driver Controls Navigating the Control Panel Navigate through the control panels in much the same way as you would a web page. Click on the headings, menus and highlighted links for information.
Page 135
NVIDIA Video Driver Controls The Help menus provide index and search features, and direct links to the NVIDIA website etc. Figure C - 3 Help Menus C - 4 NVIDIA Video Driver Controls...
Specifications Appendix D: Specifications Latest Specification Information The specifications listed in this Appendix are correct at the time of going to press. Certain items (particularly processor types/ speeds and CD/DVD device types) may be changed or updated due to the manufacturer's release schedule. Check with your service center for details.
Feature Video Adapter Integrated Video Option Options Intel G965 Integrated Video Shared Memory Architecture of up to 376MB of Dynamically Allocated Video Memory Fully Supports DirectX 9.0 Storage One Changeable 12.7mm(h) Optical Device (CD/DVD) Type Drive (see “Optional” on page D - 5 Two Changeable Bays for 3.5"...
Specifications Feature Interface Four USB 2.0 Ports One USB 2.0 Port (for RF KB & Mouse) One E-SATA Port One Mini-IEEE1394a Port One Headphone-Out Jack One Microphone-In Jack One Line-In Jack One S/PDIF Output Jack (5.1CH) One S-Video-In Jack One Composite Video-In Jack Card Reader Embedded 7-in-1 Card Reader (MS/ MS Pro/ SD/ Mini SD/ MMC/ RS MMC/ MS Duo) Note: MS Duo/ Mini SD/ RS MMC Cards Require a PC Adapter...
Feature Power Full Range AC/DC Adapter - AC Input 100 - 240V, 50 - 60Hz / DC Output 20V, 9.0A (180 Watts) Environmental Temperature Spec Operating: Non-Operating: Physical 625.5mm (w) * 396.9mm (d) * 110mm (h) including hinge assembly Dimensions & 11kg Approximately Weight Optional...
Windows XP Information Appendix E: Windows XP Information This Appendix contains information (including control panel information, driver installation etc.) for users of the Windows XP OS. E - 1...
Windows XP Information DVD Regional Codes Go to the Control Panel and double-click System > Hardware (tab), click Device Manager, then click the + next to DVD/CD-ROM drives. Double-click on the DVD-ROM device to bring up the Properties dialogue box, and select the DVD Region (tab) to bring up the control panel to allow you to adjust the regional code.
Start menu. When you install programs and utilities they will be installed on your hard disk drive, and a shortcut will usually be placed in the Start menu and/or the desktop. You can customize the look of the Start menu by right-clicking the Start menu and selecting Properties from the menu.
Windows XP Information Audio Features You can configure the audio options on your computer from the Sounds and Audio Sound Volume Devices Adjustment HD Audio Manager the Realtek Audio Configuration menus. How high the sound vol- ume can be set depends on the setting of the vol- ume control within Win- dows (and the volume...
Hot Key Buttons The hot key buttons on the top of the computer allow you to alter the brightness of the screen, and give instant access to a user-defined application, with one quick but- ton press. After installing the driver (see page Double-click the icon to bring up the configuration menu to define which appli- cation to open when the application hot key button...
(.exe) file, not just the shortcut. To find the application right- click its shortcut on the desktop and click Prop- erties. Click the short- cut (tab) and see where 3. An Open dialog box will appear on the screen.
The GeForce Go 7600 can also be accessed by right-clicking the desktop Display > Laptop Display. You can also access NVIDIA nView Desktop Manager from the Windows Control Panel (see page (Figure E - 7 on page E - to access the Intel GMA control panel.
Page 149
Windows XP Information Figure E - 7 - Display Properties E - 8 Video Features...
Intel Video Driver Controls Video Driver Installation To access the Intel Graphics Media Accelerator Driver Controls you must install the video driver as indicated below). Make sure you install all the drivers in the order in- dicated in Table E - 2, on page E - Intel Video 1.
Windows XP Information Intel GMA Control Panel You can also access the Intel(R) Graphics Media Accelerator Driver from the Taskbar Icon Windows control panel. The Intel GMA control panel can also be ac- cessed by clicking the icon in the taskbar and selecting Graphics Properties from...
Page 152
You may make changes to the color, schemes, Hot Keys etc. by clicking the appro- priate menu item or button. Click Information (button) to obtain useful information about the graphics properties of the computer, and see the Support tab in Informa- tion to get weblinks to the latest information on the Intel Website.
3. Click on Scheme Options (button). click its shortcut on the 4. Type a name for the scheme. desktop click Proper- 5. If you want to automatically launch an application when running the scheme click on ties. Click the Shortcut (tab) and see where the 6.
NVIDIA Video Driver Controls Video Driver Installation To access the NVIDIA GeForce Go controls you must install the video driver as in- dicated below. Make sure you install all the drivers in the order indicated in - 2, on page E - NVIDIA Video 1.
Page 155
Windows XP Information Help Menus Right-click on many of the items in the tabs to bring up the “What’s This?” button. Click the “What’s This?” button to bring up the help menu. Figure E - 11 Screen Examples E - 14 NVIDIA Video Driver Controls Right-click on a control panel item to bring up a Help menu (see sidebar).
NVIDIA nView Desktop Manager The nView Desktop Manager allows quick access to control panels for features such as Desktop Management, Profiles, Hot Keys etc. The Control panel may be ac- cessed as follows. Click Start, point to Settings and click Control Panel (or just click Control Panel).
Windows XP Information Power Management The computer uses the ACPI power management system to conserve power by con- Shutdown trolling individual components of the computer (the monitor and hard disk drive) or the whole system. Note that you should always shut your com- puter down by choos- Using some form of power management greatly increases the life span of the ing the Shut Down/...
Power Schemes You can set your computer to conserve power through individual components by means of Power Schemes. You can also adjust the settings for each scheme to set the monitor to turn off after a specified time, and the computer's hard disk motor to turn off if the hard disk drive has not been accessed for a specified period of time (if the system reads or writes data, the hard disk motor will be turned back on).
When you come back from hibernation, you can return to where you last left off set the power button to (what was on your desktop) without reopening the application(s) and file(s) you last send the system into used.
Standby Standby saves the least amount of power, but takes the shortest time to return to full operation. During Standby the hard disk is turned off, and the CPU is made to idle at its slowest speed. All open applications are retained in memory. When you are not using your computer for a certain length of time, which you specify in the operating system, it will enter Standby mode to save power.
Windows XP Information Configuring the Power Button The power button may be set to send the computer in to either Standby or Hibernate mode. In Standby mode, the Power LED will blink green. In Hibernate the LED will be orange. If the only the display is turned off, the LED will remain green. Figure E - 15 Power Options (Advanced - Power...
Driver Installation The Device Drivers & Utilities + User’s Manual CD- ROM (WinXP) contains the drivers and utilities nec- essary for the proper operation of the computer. The table opposite lists what you need to install, and it is very important that the drivers are installed in the order indicated.
Windows XP Information What to Install This section covers driver and utility installation instruc- tions for Windows XP Home/Professional & Media Cen- ter Edition. Insert the Device Drivers & Utilities + User’s Manual CD-ROM and click Install Drivers (button)/Optional (button). Alternatively Click Start and navigate (Browse..) to follow the manual setup in- structions.
Updating/Reinstalling Individual Drivers If you wish to update/reinstall individual drivers it may be necessary to uninstall the original driver.To do this go to the Control Panel in the Windows OS and double- click the Add/Remove Programs item. If you see the individual driver listed (if not see below), uninstall it, following the on screen prompts (it may be necessary to restart the computer).
Windows XP Information New Hardware Found If you see the message “New Hardware Found” (Found New Hardware Wizard) during the installa- tion procedure (other than when outlined in the driver install procedure), click Cancel to close the window, and follow the installation procedure as directed. Driver Installation Procedure Note that X is the drive letter assigned to the CD/ DVD-ROM drive.
Intel Video 1. Click 2.Install Video Driver > Yes. Navigate (Browse...) to X:\Drivers\01VGA\Intel\Setup.exe and click 2. Click Next > Yes > Next > Next. 3. Click Finish to restart the computer. NVIDIA Video 1. Click 2.Install Video Driver > Yes. Navigate (Browse...) to X:\Drivers\01VGA\Nvidia\setup.exe and click OK.
Windows XP Information Modem 1. Click 4.Install Modem Driver > Yes. Click Start (menu) > Run... and navigate (Browse...) to X:\Drivers\03Modem\ssetup.exe and click OK. 2. Click OK. 3. The modem is ready for dial-up configuration. Modem Country Selection Be sure to check if the modem country selection is ap- propriate for you (Control Panel >...
Windows XP Information Wireless LAN Modules If you have included either an Intel PRO/Wireless 3945ABG (802.11a/b/g) PCIe WLAN module, or 802.11b/ g USB WLAN module, in your purchase option the LED will be green. Install the appropriate driver for your module indicated in “Intel WLAN Driver Installation”...
Intel WLAN Driver Installation 1. Insert the Device Drivers & Utilities + User’s Manual CD-ROM (WinXP) into the CD/DVD drive. 2. Click Optional (button), and then click 2.Wireless Lan > Yes. (Click Start (menu) > Run... and navigate (Browse..) to X:\Others\02WLan\Intel\Autorun.exe and click OK.
Windows XP Information 802.11 b/g USB Wireless LAN Driver Installation 1. Insert the Device Drivers & Utilities + User’s Manual CD-ROM (WinXP) into the CD/DVD drive. 2. Click Optional (button), and then click 2.Wireless Lan > Yes. (Click Start (menu) > Run... and navigate (Browse..) to X:\Others\02WLan\AzureW\Setup.exe and click OK.
Peer to Peer Network Setup When setting up a Peer to Peer network connection in WinXP please follow the instructions below to set up a static IP: Click Start and go to Connect to > Show all connections (Start > Settings > Network Connections). Double-click Local Area Connection Click Internet Protocol (TCP/IP), and then double-click Properties..
Page 173
Windows XP Information Click Use the following IP address:, and type in static IP address e.g. 192.168.1.1. Click OK, and close all the control panels. Restart the computer and connect the computers with the appropriate network cable etc. E - 32 Peer to Peer Network Setup Figure E - 21 - Setting the Static IP Address...
8. You can configure the settings at any time by going to the IVT Corporation BlueSoleil - Main Win- dow control panel (Start > Programs/All Programs > IVT BlueSoleil), or by clicking the taskbar/ desktop icon Windows XP Information LED will be orange.
Page 175
Windows XP Information User Guide View the BlueSoleil User Guides (Contents and In- dex) from the Help menu (or press the F1 key) in Corporation BlueSoleil - Main Win- dow control panel. Click BlueSoleil User Guides in the Contents tab, and click to select the appro- priate User Guide from the panel on the right.
Remote Control Unit If your purchase includes the optional TV Tuner module you will be provided with a remote control unit. You need to install the consumer infrared driver to enable all the remote control unit functions. The remote control unit allows to remotely start and shutdown the system, to run Windows Media Center and navigate the Media Center menus etc.
Page 177
Windows XP Information Figure E - 23 Remote Control Unit E - 36 Remote Control Unit Sleep Button My TV My Music My Pictures My Videos Stop Record Pause Play 10. Rewind 11. Fast Forward 12. Replay 13. Skip 14. Back 15.
9. Click Finish to restart the computer. 10. Run the application from the Start > Programs/All Programs > Cyberlink PowerCinema and select the PowerCinema program, or double-click the icon on the desktop. 11. Help is available from within the PowerCinema program.
4. Choose the language you prefer and click OK. 5. Click Next > Finish to restart the computer. 6. Run the BisonCap application program from the BisonCam shortcut on the desktop, or from the BisonCam item in the Start > Programs/All Programs menu.
PC Camera Audio Setup If you wish to capture video & audio with your camera, it is necessary to setup the audio recording options in Windows. Go to the Start menu and point to Settings (or just click Control Panel) and click Control Panel, then double- click the Sounds &...
Page 181
Windows XP Information Figure E - 24 Audio Setup (Windows XP) E - 40 PC Camera Module...
Bison Cap BisonCap is a video viewer useful for general purpose video viewing and testing, and can capture video files to .avi format. Run the BisonCap program from the Start > Programs/All Programs > Bison- Cam menu (it is recommended that you set the capture file before the capture process - see Set Capture File below).
Windows XP Information Eliminating Screen Flicker If you find that the video screen in the BisonCap program is flickering, you can try to adjust the setting in the Video Capture Filter options. 1. Run the BisonCap program. 2. Go to Options and scroll down to select “Video Capture Filter...”. 3.
Wireless Keyboard & Mouse Kit If you have included the RF wireless keyboard and mouse kit in your purchase op- tion, a quick installation guide is provided to guide you through setting up the sys- tem. However, first see the hardware setup instructions on the Windows XP driver as indicated below.
Windows XP Information Setting Up SATA RAID or AHCI Modes RAID Mode If your purchase includes the RAID (Redundant Array of Independent Disks) option, the following pages pro- vide an introduction to configuring your hard disks in RAID mode. A RAID requires two hard disks, and you may use your hard disks in combination with Striping (RAID 0) or Mirroring (RAID 1) for either fault tolerance or performance.
Page 186
Prepare the following before setting up your Serial ATA hard disks in RAID or AHCI mode: An operable computer with a floppy drive (to create a SATA RAID/AHCI driver diskette). The Device Drivers & Utilities + User’s Manual CD-ROM (WinXP). An external USB floppy disk drive.
Page 187
Windows XP Information SATA RAID or AHCI Setup Procedure (BIOS) Go to the operable computer running Windows XP and insert a prepared formatted blank 3.5" 1.44MB floppy diskette. Insert the Device Drivers & Utilities + User’s Manual CD-ROM (WinXP) into the CD/DVD drive of the operable computer.
Page 188
For RAID Only (for AHCI Mode go to Press Ctrl + i to enter RAID configuration menu. Select 1.Create RAID Volume and press Enter. RAID Volumes: None Defined Physical Disks: Port Drive Model HDT722516DLA380 ST380811AS Figure E - 27 Specify the RAID volume name and then press Tab or Enter to advance to the next field. Specify the RAID level (RAID 0 or RAID 1 - see page E - 45) and then press Tab or Enter to advance to the next field.
Page 189
Windows XP Information Press Enter and select the Strip Size (best set to default). Press Enter and select the Capacity size (best set to default). Press Enter to Create Volume. Confirm the selection by pressing Y. 10. This will now return to the main menu. RAID Volumes: Physical Disks: Port Drive Model...
Page 190
Intel(R) 631xESB/632xESB SATA RAID Controller (Server/Workstation ESB2) Intel(R) 631xESB/632xESB SATA AHCI Controller (Server/Workstation ESB2) • For RAID Mode - Intel(R) 82801HR/HH/H0 SATA RAID Controller (Desktop ICH8R) • For AHCI Mode - Intel(R) 82801HR/HH/H0 SATA AHCI Controller (Desktop ICH8R) 17. After you have selected the appropriate option, press Enter.
Windows XP Information Intel Matrix Driver Installation 1. Insert the Device Drivers & Utilities + User’s Manual CD-ROM (WinXP) into the CD/DVD drive. 2. Click Optional. 3. Click 1.Install Intel Matrix > Yes Click Start (menu) > Run... and navigate (Browse...) to X:\Others\01Matrix\iadata_cd.exe and click OK.