Advertisement
The MC-9102 antenna amplifier is designed to amplify weak
signals of terrestrial TV. Broadband board amplifier to
antenna box. Such solution ensures amplifying of weak
signals already on antenna input, which is much important
at low signal-to-noise ratio.
Shielding the amplifier in the ZnAl cast significantly
reduces the sensitivity to noise. All made in hybrid
technology, it means whole electronics of the amplifier is
placed on the ceramic layer. Hybrid, thick-layer technique
involves applying conductive paths, resistors, capacitors
and masking, protecting and insulating layers on ceramic
substrates by screen printing.
Range:
Channels:
Gain :
Number of outputs [connectors type]:
Number of inputs [connectors type]:
Main features:
Maximum output level:
Ripples:
Input/output impedance:
Power supply:
Shielding:
Operation temp:
Guarantee:
DELTA-OPTI Monika Matysiak; https://www.delta.poznan.pl
POL; 60-713 Poznań; Graniczna 10
e-mail: delta-opti@delta.poznan.pl; tel: +(48) 61 864 69 60
2021-09-12
User Manual
Code: MC-9102
ANTENNA PREAMPLIFIER MC-9102 1-68 17-28 dB
5 MHz ... 860 MHz
1 - 68
17 ... 28 dB
1 pcs (F connector)
1 pcs (antenna terminals)
• High resistance to mechanical damages and weather conditions
• Very good heat dissipation due to the thermal properties of the ceramic substrate
• Perfect resistance to electrostatic interactions
100 dBµV
1.6 dB
300 Ω / 75 Ω
12 V DC ± 5% / 50 mA
-30 °C ... 55 °C
2 years
MC-9102
2/3
Advertisement
