Table of Contents
Advertisement
Quick Links
Instruction Manual
Cyclone Separator
Model CY
Thank you for purchasing Teral Cyclone Separator.
Read this instruction manual carefully and understand how to use Cyclone
Separator correctly and safely before starting the operation. Do not run the
equipment or perform the maintenance and inspection work until you fully
understand the operating and maintenance instruction in this manual.
All the warning notes in this manual and the warning labels on the equipment
should be strictly observed for your safety.
Keep this manual in a safe place and read it again anytime you operate
Cyclone Separator or perform maintenance on it.
For contractors who carry out equipment work:
Please be sure to deliver this manual to the customer who will operate, inspect or
maintain Cyclone Separator.
To users
Advertisement
Table of Contents
Summary of Contents for Teral CY
- Page 1 Cyclone Separator Model CY To users Thank you for purchasing Teral Cyclone Separator. Read this instruction manual carefully and understand how to use Cyclone Separator correctly and safely before starting the operation. Do not run the equipment or perform the maintenance and inspection work until you fully understand the operating and maintenance instruction in this manual.
- Page 2 (5) Failures and breakage resulting from the use of parts other than those designated by TERAL TERAL shall not be liable for the damage caused by incorrect or reckless use of the Cyclone Separator. Cost and expenses incurred for sending engineer(s) in such a case shall be borne by the user.
- Page 3 This manual does not include content that particularly demands expert knowledge such as disassembling and repairing. Contact TERAL INC. or service representative for repairs. Product specifications and content of the instruction manual are subject to change without prior notice.
- Page 4 1. Safety precautions 1.1 Types and meanings of warning terms This instruction manual divides precautions into four categories according to the level of hazard (or the severity of the accident). Be sure to understand the meanings of the following terms and comply with the content (instructions) of the instruction manual.
- Page 5 2. Part names and of dimensions of Cyclone Separator Names of Parts Example of Application Pressure Gauge Out let Inlet (Clean Fluid Outflow Port) (Inflow Port) Drum Filter Dirty Coolant Reservoir Clean Coolant Reservoir Underflow (Dirty Fluid Outlet) 3. Specifications Filtering Rate 30 m×90% Sludge...
- Page 6 Install a pressure gauge on the pipe entering the inlet port and confirm that the pressure is appropriate (more than 0.15MPa). Check for unusual sound or vibration. If you notice it, immediately stop the operation and contact a service station designated by Teral for consultation.
- Page 7 5. Periodic Check Periodical check list Check Frequency Check and Every adjustment Check item Method Criteria Correction points Daily month Adjust the pressure Inlet Inflow Pressur Within the set by installation of a pressure e gauge pressure range branch line or other (Inflow port) parts Outlet...
- Page 8 Head Office 230, Moriwake, Miyuki-cho, Fukuyama-city, Hiroshima, 720-0003, Japan Tel.+81-84-955-1111 Fax.+81-84-955-5777 www.teral.net 2016 06 TP‑307‑01...
Need help?
Do you have a question about the CY and is the answer not in the manual?
Questions and answers