Power Switch - Peavey Vypyr VIP Series Operating Manual

Engineeing Noes Engineeing Noes
0 0
1 1
2 2
0 0
8 pIN mIDI 8 pIN mIDI
® ®
Connect your Sanpera Connect your Sanpera I or Sanpera II here. I or Sanpera II here.
Sanpera foot controllers and is required for their operation. Sanpera foot controllers and is required for their operation.

pOWEr SWItCH

pOWEr SWItCH
This two-way rocker switch applies power to the unit when placed in the ON position. This two-way rocker switch applies power to the unit when placed in the ON position.
CautION: CautION: The on/off switch in this unit does not break both sides of the primary mains. Hazardous engery The on/off switch in this unit does not break both sides of the primary mains. Hazardous engery
can be present inside the chassis when the on/off switch in in the OFF position. can be present inside the chassis when the on/off switch in in the OFF position.
aC pOWEr INLEt aC pOWEr INLEt: :
This is the receptacle for an IEC line cord, which provides AC power to the unit. Connect the line cord to This is the receptacle for an IEC line cord, which provides AC power to the unit. Connect the line cord to
this connector to provide power to the unit. Damage to the equipment may result if improper line voltage is this connector to provide power to the unit. Damage to the equipment may result if improper line voltage is
used. (See line voltage marking on unit). used. (See line voltage marking on unit).
Never break off the ground pin on any equipment. It is provided for your safety. If the outlet used does not Never break off the ground pin on any equipment. It is provided for your safety. If the outlet used does not
have a ground pin, a suitable grounding adapter should be used and the third wire should be grounded have a ground pin, a suitable grounding adapter should be used and the third wire should be grounded
properly. properly.
To prevent the risk of shock or fire hazard, always make sure that the amplifier and all associated To prevent the risk of shock or fire hazard, always make sure that the amplifier and all associated
equipment is properly grounded. equipment is properly grounded.
NOtE: FOr u.K. ONLy NOtE: FOr u.K. ONLy
As the colors of the wires in the mains lead of this apparatus may not correspond with the colored markings As the colors of the wires in the mains lead of this apparatus may not correspond with the colored markings
identifying the terminals in your plug, proceed as follows: identifying the terminals in your plug, proceed as follows:
(1) The wire which is colored green and yellow must be connected to the terminal which is marked by the (1) The wire which is colored green and yellow must be connected to the terminal which is marked by the
letter E, or by the Earth symbol, or colored green or green and yellow. (2) The wire which is colored blue letter E, or by the Earth symbol, or colored green or green and yellow. (2) The wire which is colored blue
must be connected to the terminal must be connected to the terminal
which is marked with the letter N, or the color black. (3) The wire which is colored brown must be connected which is marked with the letter N, or the color black. (3) The wire which is colored brown must be connected
to the terminal which is marked with the letter L, or the color red. to the terminal which is marked with the letter L, or the color red.
This particular style of MIDI jack provides This particular style of MIDI jack provides pow
1 1
2 2
power to the er to the