Quick Start Guide
Waterproof Pendant Activation & Clearing
To Send an Alarm
Simply press the gray activation
button and hold it for at least
one second.
Clearing with Magnetic Alarm Clearance Card
To Clear an Alarm
With the magnetic alarm
clearance card.
©2018 Advanced Wireless Communications. All rights reserved. *All other trademarks are the property of their respective owners.
The Pendant Will Vibrate
And you will see a series of
red flashing lights that will
blink rapidly at first and then
will slow to a rate of once
every three seconds until the
alarm is cleared.
Place The Card
Over the gray activation
button.
Please Note
After Sending an Alarm
The end user can send a
subsequent alarm once
ten seconds has elapsed,
even if the initial alarm has
not been cleared on the
device.
A Series of Six Blue
Flashing lights will indicate a
successful alarm clearance.
20809 Kensington Blvd, Lakeville, MN 55044
www.advancedwireless.com
(800) 475-5852
500641