Download Print this page
Advanced Wireless Communications AW-NCB4100 User Manual

Advanced Wireless Communications AW-NCB4100 User Manual

Wireless nurse call box

Advertisement

Quick Links

User Manual
AW-NCB4100(W)
Wireless Nurse Call Box

Advertisement

loading

Summary of Contents for Advanced Wireless Communications AW-NCB4100

  • Page 1 User Manual AW-NCB4100(W) Wireless Nurse Call Box...
  • Page 2: Product Summary

    This nurse call box becomes part of the ODIN Care system infrastructure and is an initiator that provides activation and deactivation of the ODIN Care system. The AW-NCB4100(W) is white in color and has a gray faceplate label. Status LED’s are located in the upper left-hand corner of the call box and provide easy visual confirmation of the call box status.
  • Page 3 Call Box Functions The AW-NCB4100(W) is designed to be used in a wide variety of applications and the means of activating the call box are as follows: Large Blue Button Press Will activate the call box primary alarm transmission. This large button is easy to see and easy to activate.
  • Page 4 Call Box Configurations Pull Cord Single Bed Dual Bed Configuration Configuration Configuration 900291 900292 900295 Changing Call Box Configurations To change the application configuration of a call box, Magnetic Breakaway Ports will have to be reconfigured. Pull Cord Call Box – Must have both Magnetic Breakaway Jumper Plugs installed.
  • Page 5 Mounting Bracket Installation The AW-NCB4100(W) call box should be mounted onto flat surface using the appropriate mounting screws/hardware for the surface type. The mounting bracket screw holes are designed to utilize a standard #6 or #8 pan head screw. There are four available mounting hole locations.
  • Page 6 Battery Replacement Remove the call box from the mounting bracket. Firmly press the rear housing release button while gently pulling outward on the bottom rear housing cover of the call box. When the release button is pressed far enough inward, the rear housing cover will release and hinge open.
  • Page 7 902-928 MHz Auto Check-In: 3 minutes The AW-NCB4100(W) is not water resistant – do not submerge in water. Call Box Cleaning Recommendations Never use strong cleaning chemicals to clean the surface area of two- way radios or call boxes. Some examples would be: acetone, bleach, window cleaner, degreasers, hand sanitizers, nail polish remover or like products.
  • Page 8 Replacement Parts List 914459 Battery, 3.6 volt Lithium 916200 Bed cord, push button, white, 10 foot, RJ45 plug 916187 Bed cord, push button, white, 10 foot, ¼” phono plug 900274 Magnetic Breakaway, jumper plug 900293 Magnetic Breakaway Module, RJ45 900294 Magnetic Breakaway Module, ¼” phono plug 900273 Mounting bracket, Nurse Call Box 900291 Nurse Call Box assembly, Restroom configuration 900292 Nurse Call Box assembly, Single bed, RJ45 Breakaway Module...
  • Page 9 (952) 469-5400 / Toll Free: (800) 475-5852 20809 Kensington Blvd Lakeville, MN 55044-8353 www.advancedwireless.com ©2020 Advanced Wireless Communications. All rights reserved. 703119...

This manual is also suitable for:

Aw-ncb4100w