Table of Contents
Advertisement
Available languages
Available languages
Quick Links
Wall Box Dimmer Module
Art.no 36-6592 Model Hytronik HD2200
Please read the entire instruction manual before using
the product and then save it for future reference.
We reserve the right for any errors in text or images
and any necessary changes made to technical data.
In the event of technical problems or other queries,
please contact our Customer Services.
Note:
•
This product must only be installed by a qualified
electrician.
•
Push-button switch spring sold separately.
Wiring diagram
Installation with a spring-
loaded on/off switch
Installation with multiple
dimmers and spring-loaded
on/off switch
GREAT BRITAIN • CUSTOMER SERVICE tel 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
Thanks to their built-in synchronisation feature, multiple
(up to 50) wall box dimmers can be controlled by the same
spring-loaded on/off switch without the need for separate
synchronisation between the wall box dimmers.
Synchronisation
1. Press and hold in the on/off switch for at least
1 second and then release it, then quick-press (for
less than 1 second) the switch again. All dimmer
modules will be switched off.
2. Press in the switch again, hold in for at least
1 second and then release. The switch modules will
now be synchronised.
Potentiometer
Potentiometer for adjusting
the lowest dimmer level
depending on the load.
Operating instructions
•
Switch light on/off: quick-press the switch. The light
will come on with the same intensity as when it was
last used.
•
Stepless dimming: hold the switch in. Every time
the switch is held in, the dimmer changes function
and alternates between raising and lowering
the light level.
Memory
The dimmer remembers the latest dimmer level setting
after a loss of power (power cut or blown fuse):
•
If the connected light was switched on when
the power was cut, the light will come back on at
the same light level as before.
•
If the connected light was switched off when
the power was cut, the light will remain off when
the power is restored.
Responsible disposal
This symbol indicates that this product
should not be disposed of with general
household waste. This applies throughout
the entire EU. In order to prevent any harm
to the environment or health hazards caused
by incorrect waste disposal, the product
must be handed in for recycling so that
the material can be disposed of in a responsible
manner. When recycling your product, take it to your
local collection facility or contact the place of purchase.
They will ensure that the product is disposed of in
an environmentally sound manner.
Specifications
Rated voltage
230 V AC, 50/60 Hz
Load halogen/LED
1–200 W/1–150 W
Power factor
≥ 0.97
Operating temperature −20 to 45 °C
Fuse
Automatic reset
Overheating protection Automatic reset
IP rating
IP20
Size (mm)
Advertisement
Table of Contents
Summary of Contents for Coitech Hytronik HD2200
- Page 1 (up to 50) wall box dimmers can be controlled by the same the power was cut, the light will come back on at spring-loaded on/off switch without the need for separate the same light level as before. Art.no 36-6592 Model Hytronik HD2200 synchronisation between the wall box dimmers. • If the connected light was switched off when the power was cut, the light will remain off when...
- Page 2 (upp till 50 st.) dosdimrar styras av samma bröts kommer belysningen att förbli avslagen när återfjädrande strömbrytare utan behov av separat spänningen kommer tillbaka. Art.nr 36-6592 Modell Hytronik HD2200 synkroniseringsledning mellan dosdimrarna. Avfallshantering Läs igenom hela bruksanvisningen före användning och Synkronisering spara den sedan för framtida bruk.
- Page 3 (opptil 50 stk.) boksdimmere styres av den spenningen ble brutt, vil belysningen forbli av når samme tilbakefjærende strømbryteren uten at man spenningen kommer tilbake. Art.nr. 36-6592 Modell Hytronik HD2200 trenger en separat synkroniseringsledning mellom boksdimmerne. Avfallshåndtering Les brukerveiledningen grundig før produktet tas i bruk og ta vare på...
- Page 4 Jos liitetty valaisin on pois päältä sähkön katketessa, palauttavalla virtakytkimellä voidaan ohjata jopa 50:tä valaisin pysyy sammuneena sähkön palautuessa. rasiahimmennintä ilman erillisiä rasiahimmentimien välisiä Tuotenro 36-6592 Malli Hytronik HD2200 synkronointijohtoja. Kierrättäminen Lue käyttöohje ennen tuotteen käyttöönottoa ja säilytä se Synkronointi Tämä...
- Page 5 Einbaudimmer (bis zu 50 St.) vom gleichen eingeschaltet war, wird sie wieder mit der zuletzt eingestellten Lichtstärke eingeschaltet, sobald Taster gesteuert werden, ohne dass eine separate Art.Nr. 36-6592 Modell Hytronik HD2200 der Strom wieder da ist. Synchronisierungsleitung zwischen den Einbaudimmern • Wenn die angeschlossene Beleuchtung notwendig ist.
Need help?
Do you have a question about the Hytronik HD2200 and is the answer not in the manual?
Questions and answers