Sd card interface
for the sinclair zx spectrum with esxdos (9 pages)
Summary of Contents for ByteDelight DivMMC EnJOY! PRO ONE
Page 1
Throughput edge connector Dual SD card sockets Power off your ZX Spectrum before connecting this interface No need to read the rest of this manual before using the DivMMC EnJOY! PRO ONE, just plug and play! Manufactured by Ben Versteeg...
Page 2
Overview With the DivMMC EnJOY! PRO ONE you can load software from SD card to your ZX Spectrum easily! The DivMMC EnJOY! PRO ONE has two configurable joystick ports, two full size SD card slots, a throughput edge connector and advanced auto detection features to make it plug-and-play.
Page 3
And the ‘CARD’ led shows the SD card activity (blue for card1, red for card2). Throughput edge connector The DivMMC EnJOY! PRO ONE has a throughput edge connector for any device, such as the ZX-HD HDMI interface or ZX-AY external stereo audio interface (check out ZXSpectrum.shop for those).
Page 4
48K BASIC in USR 0 mode. For ZX Spectrum 128K / +2 / +2A / +2B or +3 users: the DivMMC EnJOY! PRO ONE starts the ZX Spectrum in USR 0 mode. This mode supports 128K software and using the 3-channel audio chip in 128K models.
Page 5
Getting software on the memory card Disconnect power from your ZX Spectrum and pull the SD card from the DivMMC EnJOY! PRO ONE. Put the SD card into a card reader on your PC or laptop and you are able to copy files to the SD card.
Page 6
Cold start To perform a cold start without powering off your ZX Spectrum, press the reset-button and hold the SPACE key while resetting. This will reinitialize ESXDOS. Using drive names Drives are named according to their type and partition number: sd0 for the first SD card. Using ‘*’...
Page 7
DOT commands Files located in the /BIN directory are so-called DOT commands. These system commands can be executed from BASIC by typing: ".[command] <args>". DOT commands are self-explanatory: enter the command without arguments to get more information. An example, entering: .tapeout Will show: tapeOUT v0.1 (c) phoenix...
Page 8
Show screen from .scr and .sna files (or files with ZX header of type ‘CODE’) Attach tape file to input slot Space Exit from NMI mode Onscreen help ESXDOS (c) 2005-2019 by Papaya Dezign - www.esxdos.org Document revision: June 2020 Manufactured by Ben Versteeg Website: Shop: ByteDelight.com ZXSpectrum.shop...