Download Print this page

Advertisement

Quick Links

ITEM # 343-8802
If you are missing parts or have any questions about this product, contact our customer service representative first!
You can also order parts by writing to the address listed below. Please include the product model number, color and a detailed description of the
part.
*
Failure to follow these warnings and assembly instructions could result in serious injury or death.
*
Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR FUTURE USE.
*
Before each usage or assembly, inspect crib for damaged hardware, loose joints, missing parts or sharp edges, DO NOT use crib if
any parts are missing or broken. Ask your dealer or write to our customer service representative (address & phone number shown
above) for replacement parts and instructional literature if needed. DO NOT substitute parts.
Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding under an infant.
*
*
When child is able to climb out or reaches the height of 35 inches (90 cm), the crib shall no longer be used.
*
To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised by
your physician.
DO NOT place crib near window where cords from blinds or drapes may strangle a child.
*
*
Strings can cause strangulation! DO NOT place crib with a string around a child's neck, such as hood strings or pacifier cords. DO
NOT suspend strings over a crib or attach strings to toys.
*
To help prevent strangulation tighten all fasteners. A child can trap parts of the body or clothing on loose fasteners.
If refinishing, use a non-toxic finish specified for children's products.
*
*
When child is able to pull to standing position, set mattress to lowest position and remove bumper pads, large toys and other objects
that could serve as steps for climbing out.
*
Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
DO NOT use a water mattress with this crib.
*
Replace teething rail if damaged or loose (if teething rail is provided for this model).
*
*
CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY 51-5/8 INCHES (69CM BY 131CM)
WITH A MINIMUM THICKNESS OF 4 INCHES (10CM) BUT NOT EXCEEDING 6 INCHES (15CM).
Infants can suffocate in gaps between crib sides and a mattress that is too small.
*
Follow warnings on all products in a crib.
*
*
Ensure all parts and components are present before beginning assembly.
*
Assemble on soft, smooth surface to prevent damage to product finish.
*
Phillips head screw driver is not included.
*
DO NOT use power tools.
*
CAUTION: Adult assembly required.
*
Assembly will require two people.
WARNING: Should this product become damaged, and/or components are broken or
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used occasionally to clean surface. Dry
immediately. Do not use any abrasives that may damage finish. Excessive exposure to sunlight and extreme changes in temperature and
moisture can damage wood furniture.
If the crib is to be stored, store in cool dry place and carefully package all original hardware to protect from loss.
Check bolts/screws periodically and tighten them if necessary.
Jardine Enterprise warrants its product to be free from defects in material and workmanship and agrees to remedy any such defect. This
warranty covers 1 year from the date of original purchase. This warranty is valid only upon presentation of proof of purchase. This is
solely limited to the repair or replacement of defective furniture components and no assembly labor is included. This warranty does not
apply to any product which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any
way. This warranty gives you specific legal rights and you may also have other rights which vary from State to State.
CUSTOMER SERVICE
CALL 1-800-295-1980
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada H1G 3L1
E-MAIL: csr@jardcoent.com
WARNING
NOTES
missing, DO NOT USE.
CARE AND CLEANING
MAINTENANCE
LIMITED WARRANTY
MODEL# JCP001C/NC (Cherry),
JCP001W/NW (White)

Advertisement

loading

Summary of Contents for Jardine JCP001C/NC

  • Page 1 LIMITED WARRANTY Jardine Enterprise warrants its product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers 1 year from the date of original purchase. This warranty is valid only upon presentation of proof of purchase. This is solely limited to the repair or replacement of defective furniture components and no assembly labor is included.
  • Page 2: Hardware And Part List

    ASSEMBLY INSTRUCTION FOR "343-8802"CRIB JCP001C/NC (Cherry), JCP001W/NW (White) HARDWARE AND PART LIST BOLT 3"×1/4"DIA 4PCS BOLT 1-3/4"×1/4"DIA 2PCS 1/2"×1/4"DIA ALLEN WRENCH 4MM 1PC MATTRESS SUPPORT BOLT 16PCS 0.3805"×0.1785"DIA RUBBER BUMPER 2PCS MACHINE SCREW 2PCS LOCKING CASTER 2PCS CASTER 2PCS GLUE...
  • Page 3 ASSEMBLY INSTRUCTION FOR "343-8802"CRIB JCP001C/NC (Cherry), JCP001W/NW (White) NOTE: WHEN INSERTING SCREWS, TURN CLOCKWISE UNTIL TIGHT, THEN LOOSEN 1/2-3/4 OF A TURN. AFTER CRIB IS COMPLETELY ASSEMBLED, RETURN TO EACH SCREW AND TIGHTEN. USE WAX OR SOAP ON ALL SCREWS TO FACILITATE ASSEMBLY.
  • Page 4 ASSEMBLY INSTRUCTION FOR "343-8802"CRIB JCP001C/NC (Cherry), JCP001W/NW (White) STEP 3: Attach the mattress support to the 4 corner posts with the mattress support bolts (D). Use Allen Key to tighten bolts. Refer to details 1 and 2 for direction on how to properly attach the mattress support.
  • Page 5 ASSEMBLY INSTRUCTION FOR "343-8802"CRIB JCP001C/NC (Cherry), JCP001W/NW (White) STEP 4 ALIGN AND SLIDE DROP SIDE FROM THE BOTTOM ONTO THE DROP SIDE UPPER AND LOWER TRACKS ON THE LEFT AND RIGHT FRONT POSTS. MAKE SURE THE RELEASE LATCH ON THE LOWER GUIDES IS TO THE OUTSIDE OF THE LOWER DROP SIDE TRACKS (PULL TOWARDS YOU).

This manual is also suitable for:

Jcp001w/nw343-8802