Table of Contents
Advertisement
The antenna should be secured to the vehicle via the welded brackets to the
ENTERPRISE120 framework on the sides of the antenna base framework. Suitable
vehicle roof bars with clamping nuts (U-Bolts M6) must be used. Additional connections
must be made connecting coax (Tx and Rx), control cable to controller and power cables.
The vehicle roof structure should be stiff enough to prevent no more than a 0.5 dB of TX
gain loss in a 30mph gusting to 45mph wind.
Apply Loctite 242 or similar to all bolts and tighten to a torque of 13 – 15 Nm.
Direction of vehicle travel.
Antenna is to be fitted with the rear facing the direction of travel.
i-Point ACU Controller Installation
3.
ENTERPRISE120
E-mail Sales.UK@AdvantechWireless.com
Page 4 of 14
UK Office Phone +44 1480 357 600
Fax +44 1480 357 601
Website: www.AdvantechWireless.com
US Office Phone +1 480 839 4136
Fax +1 480 839 0860
Canada Office Phone +1 514 420 0045
Fax +1 514 420 0073
Ref: PM-ENT120-002-11022
Advertisement
Table of Contents
