Programming The Remote Control - LG 50PG6500 Owner's Manual

APPENDIX

PROGRAMMING THE REMOTE CONTROL

The remote control is a multi brand or universal remote. It can be programmed. to operate most remote
controlled devices from other manufacturers.
Note that the remote control may not control all models from other brands.
Programming a code into a remote mode
1 Testing your remote control.
To find out whether your remote control can operate other components without programming, turn on a
component such as a VCR and press the corresponding mode button (such as a DVD or VCR) on the
remote control, while pointing at the component. Test the POWER and PR + or - buttons to see if the
component responds correctly. If the component does not operate correctly, the remote control requires
programming to operate the device.
Switch on the component to be programmed, then press the corresponding mode button (such as DVD or
2
VCR) on the remote control. The remote control button of the desired device is illumintated.
3
Press the MENU and MUTE buttons simultaneously, the remote control is ready to be programmed with
the code.
Enter a code number using the number buttons on the remote control.
4
Programming code numbers for the corresponding component can be found on the following pages. If the
code is correct, the device will turn off.
5
Press the M M E E N N U U button to store the code.
6
Test the remote control functions to see if the component responds correctly. If not, repeat from step 2.
DVD
Brand
APEX DIGITAL
DENON
GE
HARMAN KARDON
JVC
LG
MAGNAVOX
MARANTZ
92
Codes Brand
022 MITSUBISHI
020 014 NAD
005 006 ONKYO
027 PANASONIC
012 PHILIPS
001 010 016 025 PIONEER
013 PROCEED
024 PROSCAN
Codes Brand
002 RCA
023 SAMSUNG
008 017 SONY
003 009 THOMPSON
013 TOSHIBA
004 026 YAMAHA
021 ZENITH
005 006
Codes
005 006
01 1 015
007
005 006
019 008
009 018
010 016 025