Wash Setting; First Washing Operation; Standard Washing - Kenwood K714WM18 Installation Instructions Manual

wash setting

first washing operation

Some water may be left in your machine due to tests carried out during production. To dispose of
this water, it is recommended to perform the first washing operation with the programme (Cotton
90ºC) and without laundry by inserting ½ portion of detergent in 2nd compartment of the detergent
drawer.
During initial start-up and use of the unit, there may be a slight smell while the motor is
settling in. This is not a fault; this is normal operation.

standard washing

1. Pull the door handle and put the laundry in the drum.
Make sure no laundry gets caught in the door.
2. Close the door and turn the Programme Dial to select
your wash programme and water temperature.
3. Adjust the temperature (if required). The temperature
can not be set higher than the programmes set
temperature.
4. Adjust the Spin Speed (if required).
5. Select any Optional Functions.
6. Add detergent into the detergent drawer. The quantity
of detergent will depend on the amount of laundry,
the degree of soiling and the water hardness. Use the
amount of detergent suggested on the packaging of the
detergent.
To pause the programme you have selected, press
the Start / Pause button. The Start/Pause symbol
will blink when the machine is in pause mode.
7. Press the Start / Pause button to start the washing.
8. The washing machines End LED will light when the programme is complete.
• If the door is locked and you switched the washing machine off - or if there's a power cut
- it will stay locked for 2 minutes.
• If the machine is full of water, do not open the door.
20
Kenwood 7kg Washing Machine K714WM18 Manual.indd 20
O
Rapid 15' Cotton 90°C
Daily 60°/60'
Shirts Cotton
Mix
Sport Easy Care
Hand Wash
Delicate
Spin
Allergy Safe
Select ons
Temp. Spin Delay Pre Wash Start /Pause
60°C
40°C
Cotton
e
Eco 20°C
Tem
Wool
60°C
Rinse
40°C
21/06/2018 08:10