LG RH398H-M Manual page 16

RH398H-M.BCANLLK_ENG 6/11/08
Adjust the SETUP settings - More functions
Adjust the general settings
Tunning Band – Select the appropriate band type according to the antenna
connection.
[TV]: If you are using a standard antenna to receive channels.
[CATV]: If you are using basic cable to receive channels.
Auto Channel Set – This option automatically scans and sets the available
channels.
[Start]: Start the channel scanning.
Ch. Add/Del– This feature allows you to add or erase channels from memory
manually.
[Edit]: Displays the screen which show channel editing options. (page 14)
Clock Set– Use v V b B to set the correct date and time in order to use
[Timer record].
TV Aspect – Selects the aspects ratio of the connected TV.
[4:3 Letter Box]: Select this when connecting to a standard 4:3 screen TV
and prefer the wide picture with bands on the upper and lower portions of the
screen.
[4:3 Pan Scan]: Select this when connecting to a standard 4:3 screen TV and
prefer the wide picture on the entire screen cuts off the portions that do not
fit.
[16:9 Wide]: Select this when connecting to a wide-screen TV.
16
11:08 AM Page 16
Power Save mode – Selects whether this unit is in power save mode when the
power is turned off. This option is not available when a timer recording is set.
[ON]: The front panel display is off and only signals arriving at the antenna
input are passed through when the unit is turned off.
[OFF]: Turns off the [Power Save Mode].
Initialization – You can reset the unit to its original factory settings
and format the HDD.
[Factory Set]: You can reset the unit to all its factory settings. Some options
cannot be reset (Rating, Password, and Area Code). The auto setup menu
appears on the screen after the factory settings.
[HDD format]: Everything recorded on the HDD will be erased.
Adjust the language settings
Display Menu – Select a language for the Setup menu and on-screen display.
Disc Menu/Audio/Subtitle – Select a language for the Menu/Audio/Subtitle.
[Original]: Refers to the original language in which the disc was recorded.
[Others]: To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language code list
on page 33. If you make a mistake while entering number, press CLEAR to
delete numbers.
[OFF] (for Disc Subtitle): Turn off Subtitle.
DivX Subtitle – Select a language code for the DivX ® subtitle.