LG 32LD490 Owner's Manual page 34

PREPARATION
STAND INSTALLATION
■ Image shown may differ from your TV.
When assembling the desk type stand, check
whether the bolt is fully tightened. (If not tightened
fully, the product can tilt forward after the product
installation.) If you tighten the bolt with excessive
force, the bolt can deviate from abrasion of the
tightening part of the bolt.
1
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
2
Assemble the parts of the Stand Body with
the Stand Base of the TV.
At this time, tighten the screws that hold the
Stand Body on.
M4 X 22
3
Fix the 4 bolts securely using the holes in
the back of the TV.
4
Assemble the parts of the Stand Rear
Cover with the TV.
A-30
BACK COVER FOR
WIRE ARRANGEMENT
■ Image shown may differ from your TV.
1
2
Stand Body
Stand Base
SWIVEL STAND
■ Image shown may differ from your TV.
After installing the TV, you can adjust the TV set
manually to the left or right direction by 20
degrees to suit your viewing position.
M4 X 12
Stand Rear
Cover
Secure the power cord with the Cable
Holder on the TV back cover.
It will help prevent the power cable from
being removed by accident.
Cable Holder
After connecting the cables as necessary,
install Cable Holder as shown and bundle
the cables.
Cable Holder