External Equipment Setup; Hd Receiver Setup - LG 22LU7000 Owner's Manual

EXTERNAL EQUIPMENT SETUP

■ To avoid damaging any equipment, never plug in any power cord until you have finished connecting all equipment.
■
Image shown may differ from your TV.

HD RECEIVER SETUP

■
This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive Digital signals
from a digital set-top box or other digital external device, refer to the diagram as shown below.
Connecting with a Component Cable
➊ Connect the video outputs (Y, P
COMPONENT IN VIDEO
Connect the audio outputs of the digital set-top box to the
➋
IN AUDIO
jacks on the TV.
Turn on the digital set-top box. (Refer to the owner's manual for the digital
➌
set-top box.)
Component
Select
➍
control.
Signal
480i/576i
480p/576p
720p/1080i
1080p
GB-0
, P ) of the digital set top box to the
B R
jacks on the TV.
INPUT
input source using the button on the remote
Component
O
O
O
O
(50/60Hz only)
COMPONENT
HDMI
X
O
O
O
(24Hz/30Hz/50Hz/60Hz)
(RGB) (RGB)
1
2