Programming The Remote Control - LG 19LG3050 Owner's Manual

PROGRAMMING THE REMOTE CONTROL

(Only 19/22/26/32/37/42LG30 ** , 32/37/42LG20 ** ,32/42LG32 ** , 32/37/42/47/52LG5 *** )
The remote control is a multi brand or universal remote. It can be programmed. to operate most remote
controlled devices from other manufacturers.
Note that the remote control may not control all models from other brands.
Programming a code into a remote mode
1
Testing your remote control.
To find out whether your remote control can operate other components without programming, turn on a
component such as a STB and press the corresponding mode button (such as a S S T T B B ) on the remote con-
trol, while pointing at the component. Test the POWER and P
responds correctly. If the component does not operate correctly, the remote control requires programming
to operate the device.
2 Switch on the component to be programmed, then press the corresponding mode button (such as S S T T B B )
on the remote control. The remote control button of the desired device is illumintated.
3 Press the MENU and MUTE buttons simultaneously, the remote control is ready to be programmed with
the code.
Enter a code number using the number buttons on the remote control. Programming code numbers for the
4
corresponding component can be found on the following pages. If the code is correct, the device will turn
off.
5
Press the M M E E N N U U button to store the code.
6 Test the remote control functions to see if the component responds correctly. If not, repeat from step 2.
buttons to see if the component
105