Removing Fan And Fan Motor - Technibel KPAV128C5 Technical & Service Manual

10-6. Removing Fan and Fan Motor

(1) Unlatch the 2 hooks on each side to take off the
front fan casing. (Fig. 12)
(2) Remove the 2 screws attaching the rear fan casing
and then pull the fan casing out.
(3) Insert a hex wrench in the fan boss and turn it
counterclockwise to loosen the centrifugal fan.
The fan can be removed by sliding it to the left.
(Fig. 14)
(4) Remove the 4 bolts to remove the fan motor from
the frame. (Fig. 15)
Hook
Frame
41
Hook
Front fan casing
Fig.12
Rear fan casing
Fig.13
Centrifugal fan
Hex wrench
(3mm or 7/64")
Fig.14
Bolts (M6)
Fan motor
Fig.15