Charging - Panasonic ES-WL60 Operating Instructions Manual

Attaching or removing the travel cap & holder
Press down on both sides of the cap to attach or remove. (Fig. 2)
• Check that all four protrusions on the shaver are inserted securely.
• The shaver can be kept vertically or horizontally. When carrying
the shaver, you can use the cap to protect the outer foil and
prevent erroneous operation of the switch.
Charging (Fig. 3)
• Make sure that the shaver is turned off.
• Wipe off any water droplets on the appliance socket.
• You cannot operate the shaver while charging.
1
Place the shaver on the AC adaptor until it clicks.
2
Insert the power plug into a household outlet.
• It will take approximately 20 hours to fully charge the shaver.
• Check that the charging indicator lamp glows.
3
After charging is completed, unplug the power plug
and then the shaver.
• The charging indicator lamp continues to glow after charging
is completed. There is no indication to show that "charging is
completed".
• Charging the battery for more than 20 hours will not affect
battery performance.
• Always unplug the shaver from the AC adaptor except when

charging.

Notes
• If there is noise from the radio or other sources while using or
charging the shaver, move to a different location to use it.
• The battery will deteriorate (leak battery fl uid, etc.) if not used for
over 6 months, so make sure to perform a full charge at least
once every 6 months.
• When charging the shaver for the fi rst time or when it has not
been in use for more than 6 months, the charging time may
change or the lamp on the AC adaptor may not glow for a few
minutes, or the operating time may shorten. Please charge it for
more than 30 hours in such cases.
• Recommended ambient temperature for charging is 0 °C – 35 °C
(32 °F – 95 °F). Battery performance may decrease outside of
the recommended temperature.
12
(for safety and energy saving)