Nemo XVE-2100400 Manual
  1. Manuals
  2. Brands
  3. Nemo Manuals
  4. Electric Toothbrush
  5. XVE-2100400
  6. Manual

Nemo XVE-2100400 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Summary of Contents for Nemo XVE-2100400

  • Page 3: Functional Description And Specifications

    Remove hardened barnacles, algae, moss, scum lines and tough stains; reach rudders, keels, propellers and all in- water boat surface up to 50m (164 ft) deep. Packing List Your Nemo hull cleaner electric brush is packaged together with the following accessories:  Battery charger ...
  • Page 4 Submersible up to 50m (164 ft) Caution: You must pressurize the Nemo hull cleaner electric brush before you can use it underwater, as described in Pressurizing the Nemo Hull Cleaner Electric Brush for Underwater Use, page 13.

  • Page 5: Safety Warnings

    Safety Warnings Warning: Read all safety warnings and instructions, and save them for future reference. Failure to adhere to these warnings can result in serious injury and damage to equipment. Work Area Safety  All work should be done in accordance with the local, state, and government occupational safety and health guidelines.
  • Page 6 Caution: Under no circumstances should the power tool be opened for repairs or any other purpose by anyone other than an after-sales service technician authorized by Nemo Power Tools. Opening the power tool invalidates the manufacturer warranty.  Use power tools and accessories in accordance with these...
  • Page 7  It may take some practice to get efficient with the hull cleaner electric brush. You will need to unlearn hand scrubbing techniques. Be prepared to use one to two batteries while familiarizing yourself with its operation and a new brush technique.
  • Page 8 Rechargeable Battery Safety  Use only the battery pack supplied with your power tool.  When the battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, and screws, which can make a connection from one terminal to another. ...
  • Page 9 Getting Started with the Hull Cleaner Electric Brush Your Nemo Hull Cleaner Electric Brush (HCEB-18V-10Li-50) includes the following main components:...
  • Page 10 Charging the Battery The battery is supplied partially charged, and must be charged to full capacity before using the hull cleaner electric brush for the first time. Caution: Only use the battery charger provided with the hull cleaner electric brush. Only this battery charger is matched to the Li-ion battery supplied with your power tool.
  • Page 11 Inserting a Battery into the Nemo Hull Cleaner Electric Brush 1. Ensure the speed selector switch is in the Off position. Caution: To minimize the risk of accidental activation,...
  • Page 12 2. Place the hull cleaner electric brush on to the battery. There is only one correct way to position the hull cleaner electric brush on the battery. 3. Push the hull cleaner electric brush down until it clicks into place, then close the clips on either side of the battery to lock it in place.
  • Page 13 2. Screw the handle securely into one of the holes found on either side of the Nemo hull cleaner electric brush body. Mounting a Brush 1. Ensure the speed selector switch is in the Off position.
  • Page 14 ensure that the brush spindle is securely locked into the drive shaft. Operating the Brush The brush is controlled by a red switch at the back of the tool unit. The brush motor has 3 modes: stop/off, low speed, and high speed.

  • Page 15: Underwater Use

    Pressurizing the Nemo Hull Cleaner Electric Brush for Underwater Use Your hull cleaner electric brush can be used in-water, and can be submerged and used underwater at depths of up to 50m (164ft). Before submerging the hull cleaner electric brush to any depth greater than 10m (32.8ft), it must be pressurized.
  • Page 16 Best Practices for Underwater Operation Your Nemo hull cleaner electric brush is designed to be waterproof, so that it can be used both on land and underwater. To obtain the maximum serviceable life of your hull cleaner electric brush, adhere...

  • Page 17: Maintenance

    Maintenance Servicing the Hull Cleaner Electric Brush If your Nemo hull cleaner electric brush is damaged or faulty, have it repaired by an authorized service technician. Caution: Under no circumstances should the hull cleaner electric brush unit be opened for repairs or any other purpose by anyone other than an after-sales service technician authorized by Nemo Power Tools.
  • Page 18 Before using a Nemo Power Tool, ensure that the battery for the tool has been fully charged to 100%. Do not operate a Nemo Power Tool, when the battery of the tool is low in power. If the battery power becomes low, stop work immediately and recharge the battery.

  • Page 19: Troubleshooting

    Caution: Under no circumstances should the hull cleaner electric brush or accessories be opened for repairs or any other purpose by anyone other than an after-sales service technician authorized by Nemo Power Tools. Opening the hull cleaner electric brush unit invalidates the manufacturer warranty.
  • Page 20 Problem: The battery charger is warm to the touch. Possible Cause Corrective Action Continuous or repetitive No corrective action is required as charging cycles without a this does not indicate a fault with break may cause the the battery charger. charger to warm up.
  • Page 21 Excessive mechanical seal take it out of water. Flush the tool leakage. with clean water and dry it. Contact after-sales service technician authorized by Nemo Power Tools. Problem: Unable to dismount the brush. Possible Cause Corrective Action Turn the brush clockwise and There is some debris counterclockwise.
  • Page 24 Nemo Power Tools Ltd www.nemopowertools.com...

Table of Contents