Related Manuals for Kodak AP550
Summary of Contents for Kodak AP550
- Page 1 KODAK Smart Air Purifier AP550 DUAL FAN User Manual The features described in this User Manual AP550_User Manual_V1.8 are subject to modifications without prior notice.
-
Page 2: Table Of Contents
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS 8. GRANT ACCESS 2. PRODUCT PARTS OVERVIEW 9. TROUBLESHOOTING 3. CONTROL PANEL 10. SPECIFICATIONS 4. DISPLAY ICONS 11. EXCLUSION FROM COVERAGE 5. OPERATION INSTRUCTIONS 12. FCC, IC AND CE REGULATIONS 6. MOBILE APP DISPLAY ICONS 13. -
Page 3: Important Safety Instructions
Danger WARNING: • Do not let water or any other liquid or flammable de- BEFORE USING THE KODAK SMART AIR PURIFIER, tergent enter the air purifier to avoid electric shock PLEASE READ THROUGH ALL THE INSTRUCTIONS and/or a fire hazard. - Page 4 • Only use the original reusable filter specially intended 2 meters away from other electrical appliances that for this KODAK Smart Air Purifier. Do not use any other use airborne radio waves such as TVs, radios, and ra- filters or add any extra filters in the device.
- Page 5 • This KODAK Smart Air Purifier is not intended for use by order to avoid a hazard. people (including children) with reduced physical, sen- sory or reasoning capabilities, or lack of experience and •...
-
Page 6: Product Parts Overview
2. PRODUCT PARTS OVERVIEW 3. CONTROL PANEL Power On/Off Screen Button Button Reusable and Washable Filter Back Cover Front Cover P.10 P.11... -
Page 7: Display Icons
• “No Internet connection icon” indicates that the air quality correctly. Please Re- air purifier cannot connect to the Internet set the device. If the problem persists contact the KODAK ˚C Smart Home Customer Support team. P.12... -
Page 8: Operation Instructions
5. OPERATION INSTRUCTIONS Setup Power ON • Plug in the provided power adaptor to a power socket, • Press the power button once to turn ON the air then plug in the DC plug into the DC jack located at purifier. - Page 9 Change fan speed and auto mode Sleep mode • Press the Screen button to switch the fan speed and • Press the screen button for 2 seconds, to enter sleep auto mode. The change sequence is Fan Speed 1 mode. ->...
- Page 10 Cleaning P.18 P.19...
- Page 11 Pairing mode • Pairing Flow • Press the Screen button and power button simultaneously for 2 seconds to enter pairing mode. 2sec KODAK Smart Home App 1. Select Air Purifier op- 2. Tap Continue after 3. (For IOS only) Tap...
- Page 12 (For IOS only) In the 5. Wait while pairing in 6. You may choose one 7. Tap Continue after 9. Tap Done to confirm 8. Waiting while the Wi-Fi settings, connect progress of the recommended customizing your app is setting up the the setup to Purifier-VXXXXXXXXX names or customise...
-
Page 13: Mobile App Display Icons
6. MOBILE DISPLAY APP ICONS Quick Start Guide Move up or down to show Swipe Left or Right to view outdoor weather information other air purifier devices Air Quality Indicator Power On/ Off Auto Mode Fan Speed Sleep Mode Timer Sleep Mode Schedule Graph... -
Page 14: Operation Instructions (Mobile App)
7. OPERATION INSTRUCTIONS ( MOBILE APP) • Sign up or Login KODAK Air Purifier app KODAK Smart Home To download the app: • On your mobile device, visit the App Store (iOS) or Google Play (Android) KODAK Smart Home • Search for KODAK Smart Home •... - Page 15 If you already have another prod- LOGIN: uct installed, simply select If this is your first KODAK Smart Home product, you will be asked to create an account. To set up an account: KODAK Smart Home • On your mobile device, open the •...
- Page 16 • Pairing 1. Select Add New 2. Select Air Purifier 3. Tap Continue after 4. (For IOS only) 5. (For IOS only) Device option following the steps 1-2 Go to settings Return to the app and above and connect to proceed to the next WiFi Purifier-Vxxxxxxxx step...
- Page 17 9. Tap Done to confirm the 6. Wait while pairing in 7. You may choose one 8. Tap Continue after cus- setup progress of the recommended tomizing your name names or customise it. P.32 P.33...
- Page 18 • Observe the Filter Usage 1. Tap to open the side 2. Tap Filter Usage 3. When the status bar menu of the Filter Usage is 100%, it means that the device filter needs to be cleaned P.34 P.35...
- Page 19 • Power On/Off 1. Tap to Power on 2. Tap to Power off P.36 P.37...
- Page 20 • Change the Fan Speed Indicates that the fan Indicates that the Indicates that the 1. Tap to activate to speed is low fan speed is middle fan speed is high fan speed P.38 P.39...
- Page 21 • Set Auto Mode • Set Sleep Mode indicates that the 1. Tap to activate the Indicates that the 1. Tap to activate the sleep mode is on auto mode sleep mode auto mode is on P.40 P.41...
- Page 22 • Set a Sleep Mode Timer • Delete a Sleep Mode Timer 2. A timer will pop up, 2. A timer will pop up, tap 1. Tap to activate the 1. Tap to show the select the time and tap Delete to delete the sleep timer sleep timer again...
- Page 23 • Cleaning 1. When this shows 2. Follow the cleaning 3. Cleaning Finished will the device filter needs guide steps to clean the show when the user to be cleaned, just tap filter has followed all steps on the screen, to view of cleaning guide the cleaning guide steps...
- Page 24 • Graph 1. Tap to read the 2. Tap to read the 3. Tap to read the 4. Tap to read average PM2.5 data average temperature average humidity data the average humidity data and temperature data P.46 P.47...
- Page 25 • Schedule Schedule Start Repeat 1. Toggle to activate 2. Press Start or End to 4. Press Repeat to setup 3. Select the time period the schedule and press Confirm to setup the duration the time schedule activate the duration P.48 P.49...
- Page 26 5. Press Confirm to setup the time schedule P.50 P.51...
-
Page 27: Grant Access
8. GRANT ACCESS 8.1 Add Friend You may grant access to your family and friends using the feature called Grant Access which is located on the side menu of the Dashboard. 4. Simply follow the 1. Click on “ ” which 2. -
Page 28: Troubleshooting
• Check the front cover to see if it is properly in- 9. TROUBLESHOOTING stalled. The front cover should be all the way up and locked at the front of the air purifier, and the foam is located underneath the front cover as shown. No Screen display, no light indicator •... -
Page 29: Specifications
10. SPECIFICATIONS 11. EXCLUSION FROM COVERAGE Power Adaptor Input: 100-240v, 50/60Hz • Normal Wear and Tear: Regular maintenance, repair Output: DC 15V, 1.5A and replacement of parts and components due to CARD 180+cmf normal wear and tear are not covered. Suggested Room 450-550sq.ft Area... -
Page 30: Fcc, Ic And Ce Regulations
12. FCC, IC AND CE REGULATIONS KODAK Trade Name: Model: AP550 / Kodak Air Purifier Duo / • Use of Non-eBuyNow branded Products and Kodak Smart Air Purifier AP550 Accessories: Defects or damage due to the use DUAL FAN of non-eBuyNow branded or certified Products or... -
Page 31: Warning
• Reorient or relocate the receiving antenna. 13. WARNING • Increase the distance between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV Changes or modifications, to this equipment not technician for help. -
Page 32: Ec Declaration Of Conformity
Sciences et Développement Type of equipment: Air Purifier économique Canada applicables aux appareils radio Model: AP550 / Kodak Smart Air Purifier AP550 DUAL exempts de licence. L’exploitation est autorisée aux FAN / Kodak Air Purifier Duo deux conditions suivantes : Brand: KODAK 1. - Page 33 EN50335-21-65:2003/A13:2017 RF Safety: EN62311:2008 Ozone test: UL867, section 40 The Kodak trademark, logo and trade dress are used under license from Kodak CSA C22.2 No.187 The product is labeled with the European Approval Marking CE as shown. Any unauthorized modification of the product voids this Declaration.