Download Print this page
ATD AIR ATD-6900 Owner's Manual

ATD AIR ATD-6900 Owner's Manual

9 pc. hvlp spray gun set

Advertisement

Quick Links

Read this manual carefully and understand it completely.
Retain manual for future use.
Always follow safety precautions to prevent personal injury and/or damage to the equipment.
Illustrations and photos are intended for reference only. Actual product may vary.
Specifications are subject to change without notice.
Important Safety Instructions
1. Always wear eye protection, gloves and respirator to prevent against harmful vapors while spraying.
2. Never use oxygen or any other combustible or bottle gas as a propellant. Explosion and serious
injury or death may result.
3. Many paints and solvents can be highly flammable. Please use the spray gun only on well-ventilated
areas, do not smoke or use near open flame.
4. Always disconnect the paint gun from air supply when not in use and during maintenance.
For emergency stopping and to prevent unintended operation, a valve near the gun is recommended.
5. Inspect the tool before each use to ensure there is no leakage or misaligned parts.
Be sure the trigger moves freely.
6. Never use halogenated hydrocarbon solvent, as it can chemically react with aluminum and zinc parts
of this tool.
7. Do not make any modifications to this tool.
WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer,
ATD-6900
9 Pc. HVLP Spray Gun Set
Owner's Manual
birth defects or other reproductive harm. Wash hands after handling.
Made in China to ATD Tools, Inc. Specifications
Visit us at www.atdtools.com
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the ATD-6900 and is the answer not in the manual?

Questions and answers

Summary of Contents for ATD AIR ATD-6900

  • Page 1 ATD-6900 9 Pc. HVLP Spray Gun Set Owner’s Manual Read this manual carefully and understand it completely. Retain manual for future use. Always follow safety precautions to prevent personal injury and/or damage to the equipment. Illustrations and photos are intended for reference only. Actual product may vary.
  • Page 2: Power Source

    Figure 1: Operating Instructions POWER SOURCE This tool operates best on a clean, dry supply of compressed air delivered at 29 to 50 psi. Use of a moisture trapping air filter (ATD-7812) is highly recommended as moisture or foreign matter can damage the internal parts of this tool. CAUTION: All air pressure in the system should be rated at 29 to 50 psi.
  • Page 3: Gun Handling

    GUN HANDLING For best results, please follow these basic guidelines: 1. Keep the spray gun perpendicular to the surface. Spraying in an arc will not give good results. (Fig. 3) 2. Keep gun moving from one side to the other while spraying. If you stop moving the gun while you are spraying, too much paint will build up and begin to run.
  • Page 4 ADJUSTMENT 1. Fine-tune the gun to your desired working settings of spray patterns, fluid output and degree of paint atomization using the three controls illustrated in Figure 5. Figure 5 Fluid (paint) Adjustment Knob Spray Pattern Adjustment Knob Adjustment Knob Maintenance To clean the gun, pour any leftover paint back into its container.
  • Page 5 ATD-6900 ATD-6901 ATD-6902 ATD-6903 1.4mm Gun 1.8mm Gun 1.0mm Gun (See drawing for parts) (See drawing for parts) (See drawing for parts) ATD-7812 PRT6900-TK ATD-6926 Spray Gun Filter Tool Cleaning Kit Regulator...
  • Page 6 ATD-6901 1.4mm Gun PRT6900-01 AIR ADJUST ASSY PRT6900-09 PRT6900-02 AIR VALVE ASSEMBLY PRT6900-10 FILTER (PACK OF 10) PRT6900-1.4 1.4mm TIP KIT (NEEDLE, FLUID NOZZLE, AIR CAP) PRT6900-11 FLUID ADJUST ASSEMBLY PRT6900-04 FLUID NOZZLE PLUG PRT6900-12 PATTERN ADJUST ASSEMBLY PRT6900-05 FLUID NOZZLE WASHER PRT6900-13 GUN BODY PRT6900-06...
  • Page 7 ATD-6902 1.8mm Gun PRT6900-01 AIR ADJUST ASSY PRT6900-09 PRT6900-02 AIR VALVE ASSEMBLY PRT6900-10 FILTER (PACK OF 10) PRT6900-1.8 1.8mm TIP KIT (NEEDLE, FLUID NOZZLE, AIR CAP) PRT6900-11 FLUID ADJUST ASSEMBLY PRT6900-04 FLUID NOZZLE PLUG PRT6900-12 PATTERN ADJUST ASSEMBLY PRT6900-05 FLUID NOZZLE WASHER PRT6900-13 GUN BODY PRT6900-06...
  • Page 8 ATD-6903 1.0mm Gun PRT6900-16 AIR ADJUST ASSY PRT6900-22 FLUID INLET JOINT PRT6900-17 AIR VALVE ASSEMBLY PRT6900-23 FLUID ADJUST ASSY PRT6900-1.0 1.0mm TIP KIT (NEEDLE, FLUID NOZZLE, AIR CAP) PRT6900-24 PATTERN ADJUST ASSY PRT6900-18 NEEDLE PACKING ASSEMBLY PRT6900-25 GUN BODY PRT6900-19 TRIGGER ASSEMBLY PRT6900-26 AIR INLET FITTING...