Advertisement
Main technical parameters:
Type
Rated voltage
742815
220-240V
Characteristics and structure:
A: Soleplate
B: Skirt
C: Handle
D: Back Cover
E: Spray ASM
F: Top cover
G: Fill cover
H: Steam knob
Filling water:
Rated
Rated power
frequency
50Hz
2000-2400W
I: Spray & Burst steam button
J: Auto off light
K: Cord guard
L: Pilot light
M: Temperature dial
N: Water tank
O: Clean button
Spraying:
Press the spraying button, and water will spray out from the
spraying nozzle. Always keep enough water in the water tank.
Steam ironing:
1. To use steam ironing, turn the steam control to minimum
position and set the temperature control at the "..." or MAX
position.
2. When the indicator light goes out, turn the steam control to
the suitable position.
Burst of steam:
Set the temperature control at the "..." or MAX position, then
press down the burst of steam button.
Dry ironing:
Turn the steam control to minimum position, then set the
temperature control to the suitable position.
Self cleaning:
Fill with water, then plug the iron into the mains, Set the
temperature control to the maximum position. About 3 minute later,
press the self clean button for about 1 minute. Steam and hot water
will be sprayed to clean the steam chamber. For best results use this
function once every two weeks.
Anti-drip:
This iron is equipped with a drip stop function: the iron
automatically stops steaming when the temperature is too low to
prevent water from dripping out of the soleplate.
Anti-calc:
The Anti-calc function filtrate the minerals from the water to
prevent mineral residue build up at the steam chamber.
Advertisement
