The file(s) you saved to the player can be directly run by the corresponding
mode(s) in the player
The jpg photo files can be displayed in the "PHOTO" mode of the player; the
MP3 music files can be played in the 'MUSIC" model of the player,... and so
The player is connected to the PC, the USB port from the PC will provide the
power to charge on the player simultaneously.
You also have the option to increase the memory by inserting a TF card. This MP4
player can support up to 4GB Inserting: Place the TF card and slightly push the card into
the socket of the card, i.e. connecting the unit. Under this state, you can play the content
on the card. Removing: Slightly push the TF Card, and it will spring back, you can then
take it out. Caution: Please perform inserting and pulling operation when power is off!
Otherwise, it will lead to the loss or damage to the files within the unit.
The Main Menu
There are 9 function modes in your player.
(Turn ON the Player
to show main
---to enter and operate in different function modes