Summary of Contents for Hui Zhou Boshijie Technology RC10
- Page 1 User Manual HuiZhou BoShiJie Technology CO.,Ltd Product name：GSM wireless data module Model: RC10 FCC ID : 2AQSK- RC10...
- Page 2 The RC10 module is a two-in-one module (2G wireless communication and positioning) based on the MTK 2503D, Size:24 mm× 15 mm× 3.0 mm, Total 57PIN, Suitable for GSM networks for global roaming. The RC10 module with a Abundant interface and a powerful software support platform. With secondary development software and hardware platform, it can support a variety of peripheral devices to meet the user's business function needs.
- Page 3 Ⅲ. Pin definition RC10 is an application mode with module as the main processor 1. Power supply PIN Name PIN No. Description Remark VBAT 37、38 Power supply Vmax=4.6V Vmin=3.3V Vnorm=4V VBAT1 GPS power supply Connect with 37 &38 VIO28 Output 2.8V...
- Page 4 MIC_P0 SPKP1 Audio output SPKN1 6. AD port PIN Name PIN No. Description Remark AD detect Max voltage 2.8V AD detect Max voltage 2.8V 7. Antenna PIN Name PIN No. Description Remark ANT1 GSM Antenna ANT2 GPS Antenna 8. USB download PIN Name PIN No.
- Page 5 KCOL0 USB mode select 2、3、4、27、 Hanging 28、32、33 IV. Attentions 1、Working voltage：3.3V~4.6V，typical voltage4.0V 2、Working current：Max working current 3A 3、Standby power consumption：18mA 4、Working temperature：-20° ~80° 5、Module size：24*15mm V. Schematic diagramencapsulate VI. PCB encapsulate...
- Page 6 (a)product should not collocate with other radio (b) GSM wireless data module is designed to comply with the ID statement. FCC ID is 2AQSK- RC10. The host system using GSM wireless data module, should have label indicated FCC ID 2AQSK- RC10 (c) If you buy this module,you only use the the antenna(The Gain is 1.80dBi for GSM850...
- Page 7 FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Need help?
Do you have a question about the RC10 and is the answer not in the manual?
Questions and answers