Orient electric Auctor User Manual

Cleaning And Storage
1. Always unplug the fan before cleaning.
2. Use only a soft, damp cloth to gently wipe the outer surfaces of the fan clean.
3. Ensure that the fan is switched off from the supply mains before removing the guard.
4. To clean between the grilles, we recommend using a pipe cleaner, vacuum cleaner or
compressed air to gently remove the dust.
5. DO NOT immerse the fan in water and never allow water to drip into the motor housing.
6. DO NOT use gasoline, paint thinner or other chemicals to clean the fan.
7. For storage, you may leave the fan assembled and covered to protect it from dust. Store the
fan in a cool, dry, place.
Caution
DO NOT ATTEMPT TO OPEN OR REPAIR THE FAN YOURSELF. DOING SO COULD VOID THE
WARRANTY AND CAUSE DAMAGE OR PERSONAL INJURY
Simple Troubleshooting
1. If the Fan not starting a. Check whether the power line plug is inserted into the socket. B.
Check whether the On/Off switch of the fan in turned on; c. Check whether the power supply
is OK.
2. During use, if fan vibrates: a. Check whether it is placed on a flat surface; b. Check whether
there are foreign matters near it.
Fans Home Appliances Lighting Switchgear
Orient Electric Limited
(a CK Birla Group company)
240, Okhla Industrial Estate, Phase III
New Delhi-110020
Orient Helpline no.: 1800 103 7574 (Toll Free)
Email: customer.connect@orientelectric.com
Website: www.orientelectric.com
Follow us on:
USER MANUAL
ORIENT AUCTOR
Orient Helpline no.:
1800 103 7574 (Toll Free)