Advertisement
Block Diagram:
POWER
+3.3V
SUPPLY
+1.8V
4 x 8 Channels
AUDIO IN
HOST/
SERIAL
4 x 8 Channels
AUDIO OUT
Dimension Drawings:
12000 Portland Avenue South, Burnsville, MN 55337
Phone:952/884-4051, Fax:952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 1/2006
Part Number LIT-0000XX Rev 1
SRAM
DSP
Top View
Front View
Installation:
1. Turn off power of the unit and pull mains plug
2. Remove cover plate (6 screws on the sides, 3 screws
on top, 4 screws on the rear)
3. Install the DSP-1 module (see diagram). Place the
module in the guiding on the bottom plate (A), connect
the plug to the appropriate socket (B) and insert the
SRAM
plastic spacers into the mounting holes (C)
4. Reinstall the cover plate
5. Plug in the mains cord and turn the unit's power on.
6. The N8000 automatically recognizes the DSP-1
module. No further configuration required
DSP
Side View
All Dimensions
in Millimeters
U.S.A. and Canada only. For customer orders, contact Customer Service at:
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
Other International locations. For customer orders, contact Customer Service at:
For warranty repair or service information, contact the Service Repair department at:
For technical assistance, contact Technical Support at: 866/78AUDIO
DSP-1 Part Number:
DSP-1 -- D170328
800/392-3497 Fax: 800/955-6831
+ 49 9421-706 0 Fax: + 49 9421-706 265
+ 1 952 884-4051 Fax: + 1 952 736-4212
800/685-2606
Specifications subject to change without notice.
Advertisement
