Table of Contents
Advertisement
Control settings
Selecting the set value for cooling mode (Coo)
Press the following keys:
1.
simultaneously and
briefly (< 2 s); the display
shows "SET".
2.
simultaneously and
briefly; the display shows
"Coo".
3.
simultaneously and
briefly; the display shows
the current set value.
4.
to raise the set value
or
Scanning sensor values
Press the following keys:
1.
simultaneously and
briefly (< 2 s); the dis-
play shows "SET".
2.
to display "tP".
3.
simultaneously and
briefly; the display
shows "T01".
4.
simultaneously and
briefly; the display
shows the temperature
at the return tempera-
ture sensor (ST1).
5.
simultaneously and at
least for 5 s; the display
shows "T01".
32
5.
to lower the set value
6.
simultaneously and for at
least 5 s; the change is
saved and the next
higher menu level is dis-
played.
7. To return to the standard display
(return temperature), repeat step 6
several times.
Standard setting
Setting range
6.
to display "T02".
7.
simultaneously and
briefly; the display
shows the temperature
at the flow tempera-
ture sensor (ST2).
8.
simultaneously and at
least for 5 s; the display
shows "T02" again.
9.
to display "T03".
10.
simultaneously and
briefly; the display
shows the temperature
at the air heat exchan-
ger sensor (ST3).
12 °C
10 to 15 °C
Advertisement
Table of Contents
