RH Baby&child BARLOW Assembly Instructions

Thank you for selecting RH Baby & Child lighting. Our assortment is crafted with the highest quality materials that
coordinate perfectly with our Baby & Child bedding collections, making it easy to create an elegant nursery or child's
bedroom. Each item's surface is sealed, which eliminates the need for polishing and ensures a lasting finish for years to
come.
Parts Enclosed:
(B) Mounting Plate (1)
(E) Canopy Screws (3)
(F) Swing Arm (1)
(G) Shade (1)
(H) Canopy (1)
(I) On/off Switch (1)
(K) Electrical Cord (1)
(L) Wall Anchors (2)
(M) Wall Screws (2)
BARLOW TASK SCONCE
Plug-In Installation
BARLOW TASK SCONCE – ASSEMBLY INSTRUCTIONS
Important Safety Instructions:
The luminaire can be used as plug in or a fixed unit when used with the appropriate
conversion kit. For your safety, this sconce is equipped with a 3-pronged polarized plug.
If the plug does not fit securely into your outlet, do not force it – contact a professional
electrician. Use the plug with an extension cord only if it can be fully inserted into the
cord's socket. Never alter the plug in any way.
This fixture is designed for use with LED beads. To avoid the risk of fire, do not change the
lamp personally for use with any other LED beads.
Warnings:
All wires are connected. When unpacking, be careful not to pull wires as a bad connection
may result. Do not connect electricity until your lamp is fully assembled. To reduce the risk
of fire, electrical shock, or personal injury, always turn off and unplug lamp and allow it to
cool prior to replacing light beads. Do not touch the LED beads when fixture is turned on.
Keep flammable materials away from lit LED beads.
THIS PRODUCT IS NOT A TOY AND HAS NO PLAY VALUE.
WARNING: STRANGULATION HAZARD
Keep cord at least 3 feet away from cribs, bassinets, and toddler beds.
Keep out of reach of children under 3 years of age.
PLUG-IN ASSEMBLY & INSTALLATION:
1. Carefully remove all parts from the box and remove plastic coverings.
2. Drill 2 holes into the wall that align with the holes on the mounting plate (B) of the lamp
and insert wall anchors (L).
3. Screw wall screws (M) into anchors and slide mounting plate (B) onto screws.
4. Attach the canopy (H) to the mounting plate (B) and use canopy screws (E) to secure.
5. Adjust the swing arm (F) and shade (G) to get desired lamp angle and height.
6. Plug into proper electrical outlet and turn the on/off switch (I) to test the lamp.
Care Instructions:
To clean, use a soft, dry cloth.
Do not use polishes or cleaners as they will damage the finish.